Electronics Forum | Sun Aug 21 15:35:22 EDT 2022 | zadir
good afternoon, please tell me, maybe someone has encountered a problem on the juki 730/740 machine.we have a 24 volt 10 amp power supply broken on it (it stopped turning on completely) we changed it, but now stanou can't find the zero point, he come
Electronics Forum | Tue May 05 15:12:29 EDT 2020 | electronicsprecis1
I have a Juki 740 that was working great until one day a motor cable broke and after this messege the emergency stop button has been pressed..." error popped up when I turned the machine on. I know the emergency stop works all the way. Does anyone ha
Electronics Forum | Thu Apr 29 01:55:27 EDT 2004 | Frank
Contact your manufacturer of the machine and see if the belt feeders are available. Comtra Systems is the maker of the belt feeders and I do not know if they sell direct to the end-user. I don't have any contact information for them. I know they
Electronics Forum | Sat Dec 20 02:35:27 EST 2003 | tommy
My boss who always like to read smt related mag,pick up what he can or don't understand from the article and blame all quality issue on engineering. We are seeing solder paste residue all over Juki printer equipment,on the floor,etc.This is mainly du
Electronics Forum | Thu Jul 30 10:59:05 EDT 2015 | emeto
Hi, I had similar problem on my Dage X-ray machine. I had to reinstall the firmware for the Nextmove card. Check your CDs you have with the machine and you should have a software(and manuals) which you will use to reinstall the firmware on your cont
Electronics Forum | Mon Apr 03 18:55:23 EDT 2023 | previnmoore
Im having a problem with the Juki KE2080 it's telling me that there is a head lifter error.
Electronics Forum | Tue Oct 20 23:14:01 EDT 2015 | kiwiguy12345
Hi, I have struck a problem with the X axis on my Juki 740. As soon as I "home" the machine the X driver displays the code "961" Does anyone have any ideas as to a solution for this problem? Thanks!
Electronics Forum | Fri Sep 21 16:04:48 EDT 2018 | gpascolla
We have an old juki 740 which was purchased off of eBay at this time I am having placement problems with accuracy. I have taught to the board with the camera numerous times but I still have placement problems where the chip will be off the pad by alm
Electronics Forum | Sun Jun 06 02:47:33 EDT 2004 | ravi
hello friend, if you have any problem, Zevatech m/c is handling by JUKI -Japan. You contact to juki, They will help you in deep.
Electronics Forum | Fri Sep 22 08:53:55 EDT 2006 | basem
Hi Rob. Thanks. Political situation is a true problem, but not a major limitation. I never considered any American equipment for that matter. In any case, please give me your critical situation on the Jukis. Juki is relatively young in this business
