Electronics Forum | Thu May 05 07:58:35 EDT 2016 | cyber_wolf
Not sure what you mean. 0201's and 0402's are both on 8mm feeders. Juki's will do simultaneous picks an all 8mm feeders no matter the component size. Your feeders need to be maintenanced and calibrated to reliably pick 0402's and 0201's. I hav
Electronics Forum | Fri May 06 07:58:33 EDT 2016 | cyber_wolf
Darby, I'm not completely sure I understand. Juki machines have what is referred to as a multi-head. The offsets between the heads are the same as the spacing between 8mm feeders. So the (6) heads all come down at once and "gang pick" from 6 8mm fee
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
Electronics Forum | Thu May 12 00:18:55 EDT 2016 | darby
Sorry for delay - been flat out. Sr - I understand what you are saying. My concern is that combined with the head offsets and variations in pick points (i.e. having to teach feeder positions for very slight amounts like 0.05mm)then you cycle times wi
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Thu Jan 18 09:31:47 EST 2018 | Robl
Hi All, Has anyone had any luck with gang picking the same part on Juki 2060 or FX1R's? Example: 100nf 0402, we can pick this part simultaneously from 8 feeders at once on our Yamaha's (or 12 on the old Sapphires), but on the Juki's we don't seem t
Electronics Forum | Fri Jan 16 16:01:31 EST 2015 | emeto
GSMs are great machines for many parts, but for the small parts you should look for something better and more contemporary. As it was mentioned in one of the previous posts, the feeder is a big key. I don't think there is feeder for GSM that can supp
Electronics Forum | Thu Jun 21 09:02:40 EDT 2018 | spoiltforchoice
I'd be tempted to say you buy whatever is most consistent with what you paid for the rest of the machine.... And if you can source Chinese copies& they aren't expensive it can't hurt to try a few. More generally (I don't know how these particluar ma
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Wed Mar 29 03:40:06 EST 2006 | Frank
The Juki 2060 can have both front and rear trolleys and you do not loose any feeder locations. My question was why can't the Assembleon put trolley on the rear? I recently visited a friend at a company that used a lot of Assembleon and compared run