Electronics Forum | Fri Oct 13 19:01:46 EDT 2023 | crystalw4280
I have an old Juki 2060 The electors were replaced on some heads that were disabled. Now we are showing some of the same errors with those heads. Does anyone have any suggestions for possible cause that would make this happen again. Another warning
Electronics Forum | Tue Oct 24 19:09:12 EDT 2023 | sarason
Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare) sarason
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Thu Aug 04 09:40:12 EDT 2022 | jojoled
Hi, did anybody face such error(attached)? After calibrate all axis I get this error. "E202074 : Z axis of left head : SERVO alarm. Turn off the power to the machine and perform inspection" - see attachement. Machine was fully working day
Electronics Forum | Mon Jul 03 04:18:00 EDT 2017 | leeg
I think the HLC manuals covered mostly the VCS, what is the problem?
Electronics Forum | Fri Jun 30 15:18:24 EDT 2017 | aurash
If anyone has a KE-760 user manual that he/she can share with me please, I would really appreciate it. I do have a KE-750 manual but it doesn't cover VCS (video centering system) which is my main problem. Thanks in advance, Aurash
Electronics Forum | Mon Sep 05 11:51:30 EDT 2022 | jojoled
Can anybody help with Re-calibrating the Z-axis height in MS parameter , on JUKI KE760L? In MS parameter manual, there is information that these accessories are needed to recalibrate the Z-axis , can anybody tell where to get them, or ideally how to
Electronics Forum | Thu Sep 15 13:55:31 EDT 2022 | jojoled
Hi all, I need help with problem Iam stuck with JUKI KE760L. -SERVO ALARM 1 and ALARM4 https://photos.app.goo.gl/CCDcNtbbEhJLBo47A Sometimes I do get error ON ALL 4 SERVO drivers (1-2seconds after starting the calibration routine (even before the Z
Electronics Forum | Mon Aug 01 12:52:52 EDT 2022 | jojoled
Hi , I am lookingt for somebody who can confirm or definitely reject my expectations...one guy, with some experience with JUKI 740 said, the 740 model it had, and it worked fine....so he is surprised why the newer machine doesnt have it....maybedisab
Electronics Forum | Sun Aug 29 12:29:37 EDT 2021 | jojoled
Hi, can anybody provide a Installation software for JUKI KE/FM760L,named as "Juki Flexible mounter 1.35 " or similar version? I need to change the PCB max.width limit from 410mm to 560mm(heads can travel that far, no problem) and on disk the MSDOS so