Electronics Forum | Thu Apr 07 11:24:21 EDT 2022 | rasch
It's work on juki rs-1 ? this is dedicate nozzle or is the reworked standard nozzle ?
Electronics Forum | Sun Feb 12 06:29:43 EST 2023 | kirill
Hello Pratyeka its two machines, Juki RS-1R
Electronics Forum | Thu Sep 14 06:18:00 EDT 2023 | deniseburton
Hello, mcdvoice It seems like your Juki RS-1R machine's laser height calibration may be off. When measuring a 0402 resistor, it consistently reports heights around -0.60 to -0.70, causing pickup issues during production. Manually adjusting it to -
Electronics Forum | Fri Feb 24 21:16:26 EST 2023 | sarason
PCBSynergy supports the Juki RS-1R, it can be found here https://pcbsynergy.com sarason
Electronics Forum | Mon Apr 09 22:39:53 EDT 2018 | stephenj37824
well, we have narrowed it down to the 12 nozzle Yamaha S20, the Fuji Aimex 3 and the Juki RS1. Waiting for the final quote from Fuji now. The Juki and Yamaha are within 10% of each other. It seems features and speed go to Yamaha between Juki and Yama
Electronics Forum | Wed Sep 13 12:50:44 EDT 2023 | kirill
Greetings, I would like to do a height calibration, because the laser of the machine seems to be out of control, I'll explain why: When I measure the height of a 0402 resistor, I get around -0.60 to -0.70, when I fix it on what the machines has measu
Electronics Forum | Tue Nov 03 10:37:04 EST 2020 | spoiltforchoice
If you are looking at a single machine, you are after a true "flexplacer". There are a couple of options it will depend a bit on the spped you want and how many different parts you need too load at once. Best: Europlacer Iineo for pure flexibility o
Electronics Forum | Sat Apr 28 21:13:11 EDT 2018 | stephenj37824
So lots of quotes and research later we have eliminated a few added a few to our choices lol. So it looks like we will be doing a decent volume now (due to our other board supplier letting us down as well). Roughly 4-5 million leds/connectors per mon
Electronics Forum | Wed Apr 11 07:46:00 EDT 2018 | stephenj37824
You are probably right. The Aimex III handles a larger board was my biggest draw. I will check and make sure the NXT III comes in a dual gantry configuration. Finally heard back from Juki after I basically told them if I didn't hear back they were o
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt