Electronics Forum | Wed Mar 23 17:35:36 EDT 2011 | smtequip
No - the factory 740 spec says that it will go down to an 0402. I am a former Juki agent and sold many of these machines new. I now sell them used. If I can assist you let me know: smtequip@gmail.com. Thanks, Scott
Electronics Forum | Wed Mar 23 11:48:11 EDT 2011 | charliedci
bwjm, We have placed 0402's with 740 and it worked well. When new (if 1005's existed then) maybe, but that sounds like a seller/manufacurer quoting specs. I would think all 740's being used are well used, so placement accuracy might not be per mac
Electronics Forum | Wed Mar 23 18:02:31 EDT 2011 | fredc
Hello Scott, We have sold modified 101 nozzles. They had a .25mm hole instead of standard. The customer ordered these for placing 0201s. Is it possible they were used on the 740 machine? Or maybe the 760? FredC
Electronics Forum | Tue Nov 15 00:33:42 EST 2022 | frankchan
That is right, air pressure would be a higher level of malfunction and reported on the main screen, maybe also try maintenance of the head, cleaned up and oiled them, anyway I'm speaking of experience based on the old days when I using the Fuji serie
Electronics Forum | Tue Sep 15 12:53:17 EDT 2009 | cyber_wolf
We have never needed to calibrate a juki feeder.I have been told that Juki will loan the jig out. Calibrate all of your feeders and send it back....?
Electronics Forum | Mon Jun 13 03:35:16 EDT 2011 | kenthe
We currently are looking for used yamaha, juki machines,
Electronics Forum | Tue Sep 15 08:50:42 EDT 2009 | babe7362000
Just wanted to know if the Juki Feeder Calibration Jig is worth purchasing? Pros and Cons?
Electronics Forum | Mon Jul 11 10:48:48 EDT 2016 | mnorthey
I have experienced this problem on a number of different machines and have found that it has been one bad nozzle causing the problem. We run Juki 3010 and 3020 and occasionally we have had similar problems. One question, is it bad placements on all 6
Electronics Forum | Tue Jul 12 10:40:27 EDT 2016 | leeg
Brad, have you got any calibration jigs with the machine? This could also be down to laser offset or laser scaling which are both calibrated with different jigs. Where are you based?
Electronics Forum | Tue Jul 12 10:41:35 EDT 2016 | bradholland
oh i did not enter the pcb thickness. it is set to 0.0 I thought this was only to be changed for non standard pcb thicknesses. So, with the pcb being 1.6mm this is probably the answer. I guess this means I'm dumb..