Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Mon Jan 11 11:00:48 EST 2010 | ptxems
We have recently upgraded our placement machine to a Juki KE760. We also have 2 Zevatech PM570L's. All our placement data is on individual floppy disks, they were generated using the 570 machines. Having put the disks into the 760 it does not recog
Electronics Forum | Tue Jan 05 20:21:40 EST 2010 | steinerson
Hi Jeff I would recommend you to try unexpensive user friendly Juki Late Model KE760 series. you need a flexible machine that can handle components,fine pitch QFP. This machine is very unique. you can use even without an offline software optimizer,
| 1 |
