Electronics Forum | Thu Mar 19 02:35:48 EDT 2020 | franknguyen
Hi, I got a new project, and need to provide customer the ICT (In-Circuit-Testing), FPT (Flying-Probe-Testing) process quotation. The new PCBA contains analog components, digital components, and some BGAs that can support Boundary Scan. Does anyone
Electronics Forum | Thu May 27 16:23:12 EDT 2004 | davef
Process Trials Procedures. Standard trials are often conducted on reflow ovens by production engineers during product assessment, machine approval or in process set-up. The following trials are also used by machine suppliers during equipment develop
Electronics Forum | Mon Jul 16 10:21:29 EDT 2007 | samir
d0mino, Given the fact that the SLIMKic has built in wave detection, you can just make a pallet out of 10mm delmat material, and drill a couple of holes on the pallet for the wave detect T/C's (ports 2 & 3 for left and right). All the wavesurfer is
Electronics Forum | Fri Aug 17 06:40:27 EDT 2001 | nifhail
Thanx Dave/Hussman.. We normally store our solder paste in the refrigerator at 0-10 Deg C as per what the supplier recommanded. Our floor temperature is controlled at 22 +/- 5 Deg C and Humidity is at 55 +/- 5%. Recently we have customer asking fo
Electronics Forum | Thu May 26 16:41:00 EDT 2011 | scottp
Here's what I do: - Test Surface Insulation Resistance (we're in the high reliability market and use a test significantly harder than IPC's). I also test SIR in combination with other assembly materials like conformal coatings and wave solder flux
Electronics Forum | Wed Jan 11 22:47:31 EST 2006 | davef
We didn't intend to light anyone's fur on fire [get anyone's underwear in a knot, roil the waters, have a cow man] about consultants. The Phil Zarrow wrote a useful paper that could help in evaluating paste. Here read it ... Evaluating Solder Paste
Electronics Forum | Thu May 26 08:52:42 EDT 2011 | davef
Phil Zarrow wrote a useful paper that could help in evaluating paste. Here read it ... Evaluating Solder Paste � Not An Option Contributed by Phil Zarrow of ITM an Independent SMT consulting firm With soldering being the dominant source of assembly
Electronics Forum | Tue Aug 23 03:29:37 EDT 2022 | samhe
I received a buck-boost DCDC board with an optical sensor from NextPCB, so I mounted the components and measured the efficiency. Table of contents Board received from NextPCB Solder paste printing Mounting of parts Reflow operation check Attaching
| 1 |
winsouce.jpg)