Electronics Forum | Thu Mar 24 17:37:35 EST 2005 | SuePH
Am looking for a table top mini wave to remove connectors or solder in connectors in hard to reach areas. Can anyone recommend a good brand. Thanks
Electronics Forum | Wed Apr 13 15:03:05 EDT 2005 | haviland
Am looking for a table top mini wave to remove > connectors or solder in connectors in hard to > reach areas. Can anyone recommend a good brand. > Thanks Hi--We have a couple of Wenesco Rework units, (1) for SMT and the second for PTH. These ar
Electronics Forum | Wed May 02 13:59:20 EDT 2001 | kt
Can anyone tell me what they think is the main cause of excessive solder at the end of the lead after wave. These are not solder peaks as if the leads were cold. It is a well wetted ball of solder on end of the lead. Also, some times you see excessiv
Electronics Forum | Fri Jun 23 12:30:24 EDT 2000 | Super K (Evil K)
To answer Gary's question: Gary, you will need a production board, thermal profiler, flux vendors product data sheet on the flux you intend to use, maybe your wave vendor service engineer or wave solder vendor contact (unless you know your wave) and
Electronics Forum | Fri Jun 23 12:32:20 EDT 2000 | Super K (Evil K)
To answer Gary's question: Gary, you will need a production board, thermal profiler, flux vendors product data sheet on the flux you intend to use, maybe your wave vendor service engineer or wave solder vendor contact (unless you know your wave) and
Electronics Forum | Fri May 26 05:54:40 EDT 2000 | Sal
For the past year now we have been printing adhesive with no real problems. Our printing ranges from 0603's to SOIC using a variation of aperture sizes and metal thickness foils. The crucial parameters are : aperture sizes : These obviously depend o
Electronics Forum | Wed Feb 15 19:20:46 EST 2006 | Mr. Samir
Russ, On both instruments, I ran them through the wave 20 times each using identical profiles and wave parameters, and then used statistical formulas to measure the variation and repeatability of each. I had these all in Excel, but that was around 1
Electronics Forum | Fri Apr 14 04:10:26 EDT 2000 | Richard
We have been wave soldering mini-melfs for many years. Main problem for us has been excess and bridging joints but few skips. To overcome our problem we provide a minimum of 0.5mm clearance around each component, not great use of real-estate but prov
Electronics Forum | Mon May 08 00:53:59 EDT 2000 | Jeff Sanchez
Hi Wayne, Why do you feel that your solder pot needs a fountain for this application? It is always nice to have a mini fountain wave but it is not always a must. Good flux and a steady hand go along way. Iether way you will need a steady hand! Th
Electronics Forum | Tue Sep 22 12:55:13 EDT 1998 | Pat Phipps
I'm looking for information on "volcano" soldering or mini-wave soldering. I need to solder a leaded device, thru-hole, on a already populated smt PCB. I want to do localized soldering on the pins of the device. Any help would be greatly appreciated
