Electronics Forum | Thu Aug 10 21:59:14 EDT 2000 | Dave F
Pascal: Two elementary cautines are: 1 Don't dump the board before the reflowed solder is cooled. 2 Try to manage the side to side temperature variations in your oven. I wouldn't be surprised to see 5�C variation. Good luck
Electronics Forum | Sat Feb 06 16:28:09 EST 2010 | mystkldy
I have some large ROHS SMT inductors that are moving during the reflow process. I have tried adding extra solder, gluing and doing both. I don't know what else to try, any suggestions?
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Sat Nov 09 15:13:06 EST 2002 | mjabure
If I understand what you're saying, you are reaching reflow temp's on the top side while soldering bottom side components. You might want to run a glass gauge plate over the wave and make sure your contact pattern isn't too large. If your PCB is in c
Electronics Forum | Wed Sep 13 10:22:25 EDT 2006 | james
I'm also looking for a printer that can handle a 24 inch long board? Any suggestions out there? Thanks
Electronics Forum | Wed Sep 13 13:33:09 EDT 2006 | pms
check out, http://www.smtprinters.com Paul M.
Electronics Forum | Thu Sep 14 09:29:08 EDT 2006 | Steve Pollo0ck
James, is the board 24" long or print area. Essemtec offers a printer the SP900 with a 23.93" x 21.25" print area. http://www.essemtec.com/e/147.php here is the link to our website with a video. It is sold and supported in the US by Essemtec USA. it
Electronics Forum | Wed Sep 13 12:22:34 EDT 2006 | ianlg
Hi James Check out Reprint's offerings. http://www.reprintservices.co.uk/ Regards Ian
Electronics Forum | Wed Sep 13 12:54:21 EDT 2006 | james
I am looking for something in the U.S. So far it is up between Dek, Ekra, or MPM. Anyone have any opinions on the better of the 3?
Electronics Forum | Thu Sep 14 13:40:34 EDT 2006 | Billabong
The EKRA is a fine, fine machine. Big boards are no problem. Simple operation, solid design and support.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694