Electronics Forum | Mon Aug 21 19:38:33 EDT 2000 | Dave F
Eric: I�ll pass on the uV and ammonia, also. Thoughts are: 1 You�re correct that the temperature/humidity mix can be a big driver to latex peelable solder mask cure time, but don�t overlook material thickness. Dispensers put material in a very th
Electronics Forum | Tue Dec 29 17:42:27 EST 1998 | Dave F
| Can anyone recommend a solder stop that can be applied by our PCB supplier. Our current material form Tamura Kaken is causing problems. | | The material should be capable of withstanding 1 Surface mount IR reflow cycle and 1 wave solder cycle. | W
Electronics Forum | Wed Dec 23 03:33:14 EST 1998 | Charles Stringer
Can anyone recommend a solder stop that can be applied by our PCB supplier. Our current material form Tamura Kaken is causing problems. The material should be capable of withstanding 1 Surface mount IR reflow cycle and 1 wave solder cycle. We need t
Electronics Forum | Wed Jun 22 14:14:42 EDT 2005 | Steve
Tin/Lead we have had no problem in masking off areas on a pcb during wave soldering. Lead Free alloys, Nickel Silver Copper would there be any compatability issues with a Peelable latex solder mask containing Ammonia. Really hot need to know.
Electronics Forum | Wed Jun 22 15:03:12 EDT 2005 | patrickbruneel
The only thing ammonia can do is tarnish copper and make it more difficult to solder. And the higher temp in lead-free will discolor the latex (giving it a sticky surface), but the functionality of the mask will be intact. There should be greater co
Electronics Forum | Tue Jun 03 03:46:07 EDT 2014 | akasi
Is there a peelable solder mask which can withstand an automated aqueous wash ? I need to prevent water ingress into SMT modules during the wash cycle.
Electronics Forum | Thu Jun 11 09:01:02 EDT 1998 | Dave F
| We have dispensed latex peelable solder mask, but want to begin printing. | What are your experiences with: | 1 Mask types ... latex versus vinyl? We're edging towards vinyl | 2 Stencil or screen? We're aiming towards stencil | 3 Metal or plas
Electronics Forum | Thu Jun 04 22:59:10 EDT 1998 | Dave F
We have dispensed latex peelable solder mask, but want to begin printing. What are your experiences with: 1 Mask types ... latex versus vinyl? We're edging towards vinyl 2 Stencil or screen? We're aiming towards stencil 3 Metal or plastic stenci
Electronics Forum | Thu Jun 20 08:31:36 EDT 2002 | davef
You can use a peelable, rather than a water washable, temporary solder mask? Points are: * Vinyl peelable is preferred over latex, because of lower residues. You should be very concerned about this since you are probably running a low residue proce
Electronics Forum | Tue Jan 17 16:43:03 EST 2006 | davef
If you are not washing and want to stay with a peelable mask the two basic types are vinyl and latex. Although we've seen some silicone and urethanes, they cost more. * Do not use latex peelable solder mask with a low residue soldeing process withou
winsouce.jpg)
