Electronics Forum | Sun Aug 09 15:25:17 EDT 2015 | dev88
dear sir i am new for aoi section,my work will be teaching of aoi defect and related to programming, want to know how to make program easily in mirtec 4.1.1 and what are the different standard which we must understand.
Electronics Forum | Tue Nov 06 06:23:31 EST 2007 | clampron
Good Morning Roger, The Mirtec's can be adjusted to lower your false call rate. This can be done by reducing the matching percentage for each componnent but the result of this action is that the machine becomes less selective. If you lower them too
Electronics Forum | Tue Nov 07 14:23:13 EST 2006 | CL
Hello bpeach, We purchased a Mirtec for our first AOI machine after a side by side comparison of three different manufacturers. The Mirtec proved to be far superior to the others that we had looked at. Initially, the intention of the AOI was to prov
Electronics Forum | Mon Nov 04 14:38:00 EST 2013 | andrew_11
My experience has been with yestech and mirtec.. When we compared the two mirtec won by finding more defects.. Vitrox which was formerly agilent was more difficult to program, and as a result required a higher level person to run it. We excluded the
Electronics Forum | Thu Nov 16 14:35:50 EST 2017 | sambolian
I have an issue with our Mirtec MV-7xi AOI machine where it's detecting all misaligned parts as missing part. Even when i manually select "Misaligned", it still populates the defect as missing. See attached file for example.
Electronics Forum | Fri Jun 17 17:11:59 EDT 2005 | stansmt
I have been working with the Yestech system in my facility after evaluating the Mirtec. The yestech system has far less false calls and better defect coverage based on the test vehicles I ran. The YTV-1000 out performed the Mirtec in defect detection
Electronics Forum | Thu Sep 07 09:32:14 EDT 2006 | tony_d
Hello Saaitk, I was recently tasked with selecting an AOI system for our company. We are a low to medium manufacturer as well. I looked at several different vendors and narrowed the field to Mirtec and Yestech. I found that the programming was v
Electronics Forum | Mon Dec 21 12:09:21 EST 2009 | andrew_11
Hello Dany, i had been invloved in a evaluation at another company between omron,yestech,mirtec,vitech.. I found omron and vitech too long to program for hi mix low volumee. yestech and mirtec programmed quickly. I found the mirtec to find more of t
Electronics Forum | Wed May 23 08:39:37 EDT 2012 | tony_d
Thomas, We evaluated several AOI machines and narrowed the field to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. In our experience, the MIRTEC machine simply outperformed the competitive
Electronics Forum | Thu Apr 27 05:45:20 EDT 2017 | pavel_murtishev
methos1979, 1. Mirtec, Marantz 2. Koh Young, Orbotech, Mirtec 3. Koh Young Zenith 4. Definitely Programs for 3D AOI are prepared really faster. Having defined component database, programming takes no more than a couple of hours. Fine tuning takes u