Electronics Forum | Wed Aug 12 14:35:33 EDT 2015 | ehess
having a problem with several heads miss picking 8mm feeder parts. Had to bypass 2 of the heads because it was becoming such a hardship. Heads 3, 4 (bypassed), and 8 (bypassed). On 3 and 8, it will miss so many it errors, and when I clear the erro
Electronics Forum | Fri Jul 16 09:03:40 EDT 2004 | russ
A couple of thoughts, 1. buy larger quantity reels and load more trays of the same P/N if your problem is replenishing the machine. 2. If you're talking about changeover I would suggest that the feeders be set up in the kitting process and deliverd
Electronics Forum | Tue Aug 01 09:27:13 EDT 2017 | tmennink
Hi all, We are having a lot of trouble with mis-pick trying to place silicone dome LEDs(3535 package) It seems that the silicone of the LEDs is sticking to the side wall of the carrier tape pocket. The vacuum nozzle would normally suck up the led an
Electronics Forum | Tue Jun 09 04:49:12 EDT 2015 | vinitverma
Is the machine not picking up nozzle from the nozzle changer or is the head 7 not picking up any components? Or is the mis-pick rate too high?
Electronics Forum | Fri Jun 12 18:21:52 EDT 2020 | proceng1
I've had components move in the pocket and cause mis-picks. Generally, the part moves, but settles in the pocket after a moment. So I slowed down the pick up speed. It gave the part in the feeder a chance to settle before picking.
Electronics Forum | Fri Mar 13 05:12:06 EDT 2009 | geb
Hi, Does anyone have problems with the cover tape not peeling back on the 8mm wide feeders. We often find that particularly at the start of the job, the cover tape doesn't peel back causing mis-picks. Thanks, Grant
Electronics Forum | Thu May 07 18:30:24 EDT 2015 | comatose
Planned: End of day, Out of parts, Someone forgot to queue up another magazine Unplanned: Part mis-pick, Stencil printer 2d inspection failure, Conveyor or mag handler jammed
Electronics Forum | Tue Aug 21 06:26:26 EDT 2012 | headlad
I've had a CM202DHU since new (10 years) and it is a very reliable piece of kit. I wouldn't be happy placing 0201's but if you use 110 nozzles it is capable. Just make sure that you always line up the feeders prior to running or all you'll here is mi
Electronics Forum | Tue Jan 24 12:39:24 EST 2023 | linux
Hello MagyarT, Software that Combines data from Kohyoung AOI,SPI and panasonic assembly machines YJLINK conveyors to track back quality root causes of defects -See real-time OEE on your panasonic lines at each location -Drill-down on SMT bottlenecks
Electronics Forum | Mon Jul 02 20:13:41 EDT 2001 | davef
We agree with Wolfgang. Adding points along his line of reasoning: * Also consider placed component prescience. Sometimes, a mis-pick results in paste on the nozzle, which leads to the next component being stuck on the nozzle and not placed, which
