Electronics Forum | Thu Aug 29 05:01:38 EDT 2013 | bobpan
Motor Error 5 is usually an interlock error. Take off the rear right cover and look at the red and green led's on the driver cards. If they are both lit....you have a door open or if you have carts....a feeder base switch is up. Good Luck
Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Fri Nov 06 20:43:58 EST 2020 | jmelson
Does anyone have schematics for the PC board inside a Quad IQ feeder? I have one that worked a few days ago, but now gives me blinking lights and doesn't move. Or, do you know what to do when it won't move? I have checked the contacts and the feeder
Electronics Forum | Fri Nov 13 19:37:31 EST 2020 | jmelson
Yup, that's the first thing I looked at, the pogo-pin block on the front, and where the motor plugs in. Both could be stress points. I will try resoldering those anyway, although they looked fine. I examined the rest of the board, too, and could n
Electronics Forum | Mon Mar 22 00:17:41 EST 2004 | D. Sanders
Alan, Fuji also has a standard motor feeder FMB-44 that should handle this component (believe the depth is right at 17mm for the feeder). This is the motorized feeder, not the old mechanical ones that they use to sell. D.
Electronics Forum | Thu Mar 04 22:37:58 EST 1999 | Larry Johnson
Does anyone out there have any information on this new "Fuji Motor Feeder" Price and how it compares to Hover-Davis. I should specify feeders for an Fuji IP-3. Any information would be great. Thanks Larry
Electronics Forum | Mon Mar 08 11:54:38 EST 1999 | Bob Schuster
| Does anyone out there have any information on this new "Fuji Motor Feeder" Price and how it compares to Hover-Davis. I should specify feeders for an Fuji IP-3. Any information would be great. Thanks Larry |
Electronics Forum | Fri Nov 30 11:04:23 EST 2007 | slthomas
Sounds like Mydata might be one you could look at, for example. I don't have experience with them but they do have "smart" feeder capability. Some machines use electronically controlled and motor driven feeders, some use pneumatic and/or mechanicall
Electronics Forum | Wed Oct 24 12:34:49 EDT 2007 | resource
You could have look at LASER QUADRA Pick & Place Machine manufactured by TWS Automation, Italy (www.tws-automation.com). Its a small foot print, 3000CPH, 0402 capable, 20mil capable, BGA capable, machine with motorized feeders . Dispenser is an optio
Electronics Forum | Mon Sep 04 08:12:57 EDT 2006 | o.k.
hello everybody ! I am looking for electrical motors for double & triple siemens feeders. I think siemens only sells them as a complete set for a lot of money. what can I do ? thanks in advance for any reply.
