Electronics Forum | Mon Feb 12 12:51:19 EST 2018 | dleeper
Yes, the vision system in the MPM accuflex, as well as on other MPM printers is reversed. It's kind of weird but you get used to it.
Electronics Forum | Wed Aug 08 07:11:54 EDT 2018 | tech1
Sounds like a fuse, there are many on this system
Electronics Forum | Tue Mar 25 08:35:49 EST 2003 | pjc
AccuFlex is the replacement for UltraPrint 1500. UP1500 is going obsolete. AccuFlex was desgigned for fast setup and changeovers and takes some tasks away from the operator. The UltraPrint 2000 was designed for high production, even though many users
Electronics Forum | Mon Oct 06 00:27:35 EDT 2003 | Dean
It's so ironic. The cognex vision system used in the acuflex is called an 8000 system. Turns out my factory produces these same pci based electronic assembly. Small world isn't it!
Electronics Forum | Fri Apr 30 15:11:53 EDT 2004 | pjc
MPM has a new board support system called GelFlex. It can be used on UltraPrint 2000 machines as well as AP series, UP1500 and AccuFlex models. For more info, go to http://www.speedlinetech.com/mpm/gel-flex.aspx also, contact Chris Wild at Speedline
Electronics Forum | Thu Aug 13 14:52:42 EDT 2015 | deanott
We just encountered a problem with the vision on our MPM Accuflex. We just switched jobs and when we went through a 'Vision Set-up' there was no image (just blank gray screen where you'd normally see the PCB or bottom of stencil). When we tried to
Electronics Forum | Fri Oct 03 08:58:22 EDT 2003 | SMT Process
Folks, I use both UP1500 and AccuFlex. The basis for this machine was bought from SMTech several years ago as the SMTech 500. They sold off the last few SMTech machines with the MPM name on them (stupid move because they sucked), but then quickly r
Electronics Forum | Thu Apr 19 07:38:23 EDT 2007 | bartlozie
Only options we have (i think) is the Unders Screen cleaner unit. and the tooling carousel. (this you realy need, is the best board support system) 2D inspection (i don't know if this is realy a opion) I think 145K is a lot. You can get a better p
Electronics Forum | Wed Feb 02 08:12:58 EST 2022 | openindus
And the offer for spare parts is much appreciated. We have the nuts on the automatic conveyor systems that seems to be a little of tolerance. I will get back to you if we can't fix that with new parts.
Electronics Forum | Mon Jul 29 09:19:00 EDT 2002 | pjc
Quick Change Tooling is one advantage for DEK when comparing the MPM UP2000. DEK has Form Flex. Good system, but I've heard concerns about long term dependabilty. All support tooling options offered on the UP2000 takes a bit of time to set up. So, If
