Electronics Forum | Mon Dec 29 08:54:46 EST 2003 | pjc
SPM is superior. SPM has larger print area, up to 20� x 19", vs. 17.7� x 15.7� for the UltraPrint 100. UP100 is microprocessor controlled while the SPM has a PC. The SPM cameras can be positioned more rapidly and with greater accuracy than UP100's.
Electronics Forum | Wed Jan 16 14:14:19 EST 2019 | mattkehoe
We have an older MPM SPM machine, circa 2001 that is having a hard time reading the PC hard drive. Worked fine until yesterday. We are looking for a software install package for it or, preferably, a PC with the software on it.
Electronics Forum | Fri Feb 06 15:52:18 EST 2004 | pjc
SPM is superior in terms of technology and application. SPM has larger print area, up to 20� x 19", vs. 17.7� x 15.7� for the MicroFlex. MicroFlex is microprocessor controlled while the SPM has a PC. SPM can print down to 12mil (0.3mm) fine pitch no
Electronics Forum | Mon Mar 04 11:40:04 EST 2019 | clockwatcher
Matt, Go into configuration and turn off " Wiper "
Electronics Forum | Mon Mar 04 14:13:49 EST 2019 | mattkehoe
Thanks, we found that and we are up and running. Thanks to all who replied.
Electronics Forum | Fri Mar 16 13:33:21 EST 2001 | gdstanton
Anyone out there have a real good stencil printing process control document for an MPM Corporation stencil printer model # SPM? We are seeing lots of bridging, wetting, and filling problems. Thanks in advance for your help.
Electronics Forum | Wed Jan 16 18:17:23 EST 2019 | sarason
Do a clone of our harddisk onto an identical or larger size disk. There are plenty software utilities that will do this. Ghost, Clonezilla, look up GitHub! sarason
Electronics Forum | Thu Oct 08 17:07:43 EDT 2020 | dwl
Its been a while, but as I recall, there are two air valves under the table. one controls the exit speed, and one controls the entrance. You just need to fiddle with the valve until it travels at a decent speed.
Electronics Forum | Tue Jul 15 17:28:10 EDT 2008 | proy
We have an SPM which has a faulty touch screen (worn out?? who knows). ELOtouch does not have a replacment for this old screen. Has anyone here had any luck replacing it with something else, OR replacing the computer with another, upgrading the soft
Electronics Forum | Wed Dec 14 09:46:48 EST 2016 | westshoredesign
So recently I attempted to do the trackball upgrade for our MPM SPM printer, the touchscreen was unable to calibrate correctly. Unfortunately upon reboot after installing the software the PC wont boot into MS-DOS. It's still functional, as I can brow
