Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Wed Feb 19 09:52:45 EST 2014 | brendansales
Dear Rob, Got to the maintenance menu, under the Motor section, I selected Z motor and tried to initiate motor, there was no movement on the machine and I had the error message as below: F-MOT-MSETDYN Z/12: Position counter dead I suspect that ser
Electronics Forum | Thu Feb 10 14:27:07 EST 2005 | cyber_wolf
First of all, whom are you getting it from ? Mydata, or a used equipment broker. If you can tell me what machine type you are looking at, then I can tell you what to look for. (MY-series, or TP series) Most important things right off the bat: *Machi
Electronics Forum | Tue Dec 21 12:28:11 EST 2021 | vtdivtecs
hey all, I had a comically bad failure yesterday while working with my pick and place, a part got dropped at exactly the wrong moment and flung a bracket up into the tool path, severely damaging the hydra controlboard that is next to the x camera. T
Electronics Forum | Sat Nov 26 10:17:04 EST 2005 | BillyD
All: I'm having a rough time with one of my Mydata cameras. Specifically, the X-wagon camera. I've got no video from it, no light from it, etc. I've checked all the connections, all seems fine, but it does not work. Does anyone know where there
Electronics Forum | Wed May 08 11:20:24 EDT 2013 | amelby
Thanks for the info on the Hydra tubes that will be helpful. I found the answer from one of the Mydata techs. The Camera needs the hydra head to go slower then 1.9m/sec and the setting was at 1.8m/sec. They found out that even if the machine was set
Electronics Forum | Sun Dec 10 21:40:40 EST 2006 | villu
few days ago the camera picture started jumping like a TV between signals.. the blue Cable between the control board and the computer was Broken (last 3 threads) so we changed it.. but the problem is still there.. tested with another machines Compute
Electronics Forum | Sat Apr 22 19:40:32 EDT 2023 | smtusa
"I also believe some of the on-machine tools are unmatched in the industry...manually placing parts, reviewing the boards with the downward looking camera, learning new packages, etc." What do you mean by manually placing parts and reviewing boards
Electronics Forum | Tue Mar 15 17:47:24 EDT 2022 | guyt
Hi, Has anyone had a issue with a MyData my12 dual camera system, were the calibration always shifts up after a few hours of use. It's not the mechanical calibration. it is like the machine loses it's software calibration co-ordinates ?? Any ideas
Electronics Forum | Tue Apr 04 16:17:27 EDT 2017 | bk
Does your my9 have any cameras aside from the x wagon camera and hydra camera? I believe you need a camera aside from these 2 such as a line scan camera to be able to use the auto teach option.
winsouce.jpg)
