Electronics Forum | Wed Jun 09 23:58:59 EDT 2021 | SMTA-64387687
The electrical test, on those older machines, wasn't very exact. Try to expand the tolerances, 25-30% for caps and 10% for resistors, and see if that solves your problem. Also, if I remember correctly, if you go into the layout and single-place the c
Electronics Forum | Thu Jun 10 16:40:48 EDT 2021 | cyber_wolf
Yes those verifiers seem like a good idea but they really don't work correctly. You would be better off verifying with a meter during reel changes than wasting your life on that thing. I concur that single mount will show the value.
Electronics Forum | Thu Jun 10 17:22:10 EDT 2021 | vtdivtecs
thanks! definitly not the answer I wanted to get, but it's good to hear it. Back when we sourced the machine a few years ago I was kinda against buying it as our production scale is so small it doesn't add a ton of value, BUT the electrical verific
Electronics Forum | Tue Jun 08 22:30:05 EDT 2021 | vtdivtecs
So I am having a little trouble with my mydata MY19. its an older machine picked up used and its had its quirks. recently we tried to start adding electrical verification to our workflow, and had to disable it as we were getting intermittent bad pa
Electronics Forum | Thu Feb 23 17:50:53 EST 2012 | burb1999
Trying to electrical test some transistors SOT-23, SOT323, SC70 and keep getting the no value obatined? What would cause this everything seems correct in all the part data, etc. In the parameters we have the option :) pnp: mechanical phase (2) leve
Electronics Forum | Wed Jun 05 05:14:32 EDT 2019 | chafik
Hi guys, does anybody can help me out to activate the electrical test on my machine "mydata my12", i don't have this option, but i heard that there is a trick to activate this option. Thank you
Electronics Forum | Wed Jun 05 13:07:57 EDT 2019 | tey422
Last time I play with Mydata machine is over 10 years ago. If I remember correctly, you should able to see it when you log in as "higher" user level.
Electronics Forum | Thu Jun 06 03:29:21 EDT 2019 | chafik
Thank you for you comment, but i didn't get your point, because my problem is that i don't have this option, but we can activate this option by doing a passpinlink ( kind of strap between two components on the main board ), but i don't know exactly w
Electronics Forum | Mon Jun 26 11:35:23 EDT 2000 | Christopher Lampron
Hello, We have had some problems with electrical testing of molded electrolytic and tant caps on our Mydata machines. It appears that the components will test backwards on a polarized cap test. The Mydata uses the rise time to determine polarity. Doe
Electronics Forum | Wed Dec 08 12:58:49 EST 2004 | clampron
If it were my money and I had your specifications to achive, I would go Mydata. One platform, chip shooter, optical centering, mechanical centering, electrical verification (that works)smart feeders that work, etc.... I have worked on several platfor
winsouce.jpg)
