Electronics Forum | Tue Aug 07 11:37:24 EDT 2012 | aadrian80
Could you please tell me how much have you paid for the elmo power supply,we talked with the tehnicians of mydata and they say we have to buy a new supply for our my19. Thanks!
Electronics Forum | Tue Aug 09 09:41:32 EDT 2011 | brianp
We just blew a Elmo power supply board on our MyData 12E placement machine. Can anyone suggest a supplier of spare electronic parts? We are down and MyData Inc. says that this part's lead time is 2 weeks. HELP! The MyData p/n for this board is K-029-
Electronics Forum | Wed Feb 06 11:24:19 EST 2002 | mrpsilva
Thanks in advance for your help. I am looking for the following board: MYDATA � Elmo EBAF 25/400RHI � controller for X axis If you need pictures, please let me know in order to send you Thanks Marcos
Electronics Forum | Mon Sep 17 06:45:56 EDT 2018 | mk15
hello, Does anyone know about the value of components ˇDIODE AND REZISTORˇ near MOSFET transistor Q13 IRF840 on the board Mydata Plate K-029-0016 Elmo Power. Thanks
Electronics Forum | Tue Sep 18 05:50:33 EDT 2018 | sarason
Take a photo of the area on the board and of any other areas that look similar and/or use a IRF840 or similar large FET. Oh and post it here! sarason
Electronics Forum | Wed Sep 19 10:34:44 EDT 2018 | sarason
Now I have to guess and make a few assumptions. Without looking at the back side of the board my guess is you have some 400-100V diode bridges before the resistor ,zener and the FET . The FET is a 500V 0.85 Rdson NFET. All of this suggests a chopper
Electronics Forum | Wed Feb 06 12:03:55 EST 2002 | cyber_wolf
I know exactly what it is that you are looking for, but unfortunately we do not have one. We do have some extra MOT cards though. Just curious....What makes you think that your ELMO is bad ? Is there something visibly cooked in it, or is just out of
Electronics Forum | Tue Mar 31 08:48:30 EDT 2009 | cyber_wolf
Does the PIAB or ELMO have anything to do with the small X ? I don't see any connection in the schematics.
Electronics Forum | Wed Jun 27 14:36:22 EDT 2012 | cyber_wolf
If the X axis is moving then maybe your Elmo is not adjusted correctly. There is a procedure to adjust it in the manual(assuming you have the original manual). The correct location is XGTS which is a white connector on the booster. The fans are 24V
Electronics Forum | Thu Oct 25 01:13:55 EDT 2018 | mk15
thank you for your advice, the problem was in the elmo source 350V, there was a problem of dropping voltage when the engine accelerated.
