Electronics Forum | Wed Feb 19 09:52:45 EST 2014 | brendansales
Dear Rob, Got to the maintenance menu, under the Motor section, I selected Z motor and tried to initiate motor, there was no movement on the machine and I had the error message as below: F-MOT-MSETDYN Z/12: Position counter dead I suspect that ser
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Tue Dec 21 12:28:11 EST 2021 | vtdivtecs
hey all, I had a comically bad failure yesterday while working with my pick and place, a part got dropped at exactly the wrong moment and flung a bracket up into the tool path, severely damaging the hydra controlboard that is next to the x camera. T
Electronics Forum | Wed Jun 17 01:02:16 EDT 2015 | armandogomez
Hello Had a similar problem way back with the hydra, first go to the service program manually activate the hydra camera then move the Xwagon to place the hydra ref plate over the hydra camera and check first if the camera works, second the image you
Electronics Forum | Mon Jul 04 22:09:08 EDT 2005 | grantp
Hi, I have one for sale, do you want it! MYDATA machines are perfect for low volume high mix production, and are fairly easy to operate. Don't get a TP model, as they cannot take the HYDRA head, and the MY series are much better. The good thing is
Electronics Forum | Wed Apr 05 12:27:52 EDT 2017 | emeto
the package should have nozzle(midas) and camera pre-selected(hydra camera will not work(try standard or high resolution). Odd shape recognition type will not use auto teach option(try chip, leaded, BGA.... )
Electronics Forum | Thu Jan 13 07:29:49 EST 2005 | Grant
Hi, It's both really, and we are doing higher volume of current products, but new products are increasing in component count, mostly passives. We have analog on our products, and this uses a lot of passives, plus each semiconductor needs decoupling
Electronics Forum | Fri Jun 12 15:29:51 EDT 2009 | grantp
Hi, We just had delivered one of these and it's incredible. It's an amazing machine, and watching it load such a large board totally accurately, from end to end is amazing. Apparently we took delivery of only the second machine to ship in the world
1 |