Electronics Forum | Tue Mar 17 15:15:25 EDT 2015 | spoiltforchoice
In UK/Europe AdoptSMT have a range of MyData feeder bits and a reconditioning service I d believe.
Electronics Forum | Wed Mar 18 09:52:40 EDT 2015 | rgduval
You'll want to double check the electronics in the magazines, as well as the mechanicals. Over time, the connectors can come loose, and could affect performance. I'm thinking of the "dead" feeder that you mentioned, while the rest of the feeders wo
Electronics Forum | Mon Nov 12 13:35:34 EST 2007 | dyoungquist
MyData TP9s Work well in high mix applications because change over time from 1 job to the next can be done in as little as 15 minutes if you have the right mix of magazines/feeders. Component placement rates vary depending on which component you ar
Electronics Forum | Thu Feb 10 14:56:50 EST 2005 | jimdugan
The Mydata machine is a very good high mix low volume machine. If you buy from Mydata you will be better supported, than if you buy from a broker. I would recommend you buy the newer My series machine. The TP machine was a good machine but the My ma
Electronics Forum | Thu Feb 10 14:27:07 EST 2005 | cyber_wolf
First of all, whom are you getting it from ? Mydata, or a used equipment broker. If you can tell me what machine type you are looking at, then I can tell you what to look for. (MY-series, or TP series) Most important things right off the bat: *Machi
Electronics Forum | Mon Mar 17 18:17:06 EDT 2008 | dyoungquist
If you update the MyData TP machine with the latest version of the TPSys software you can use Agilis feeders (and magazines) on a TP machine. Of course, they will charge you to do that.
Electronics Forum | Tue Nov 23 02:23:27 EST 2021 | SMTA-64387687
The TM magazines will work exactly the same on the newer machines, as they did on your TP-11. The MY100, MY200, and MY300 series machines are all available with 2 heads, Midas and Hydra.
Electronics Forum | Thu Feb 14 23:32:50 EST 2013 | padawanlinuxero
Hello ! I don't know if this helps but here goes, I have here 2 mydatas one a TP9-4 and the other MY12, on the TP9-4 we have TPSys 2.4 and we use a AM8 feeder magazine, when we bought the MY12 it came with TPSys 2.1, thinking we can use the AM8 feede
Electronics Forum | Thu Jul 18 17:38:27 EDT 2019 | rgduval
Not swapping out feeders....swapping out magazines. It only works well if you have enough extra mags to load all the feeders on. And is a viable solution if your position limited on your machine. Before the advent of Aegis feeders for My machine
Electronics Forum | Wed Oct 24 11:10:55 EDT 2007 | dyoungquist
We are running an upgraded, refurbished MyData TP9 machine in our high mix, low volume production. With those improvements it does okay on the 0402s. The TP platform is no longer in production but they are still providing good support for machines
