Electronics Forum | Fri Mar 23 10:00:38 EDT 2012 | isd_jwendell
I am a big fan of AIM SnPb solder paste. I currently use NC257-2 (no-clean, 89.5%), and recommend you include it in your evaluations.
Electronics Forum | Sat Jun 23 12:42:20 EDT 2001 | genny
OK, to reopen this and muddy the water a little more, What is the difference between REL0 and ROL0 solder. The solder paste that more than one of our suppliers is using is AIM293+ - this is REL0 The no-clean solder wire we use in house is ROL0, mad
Electronics Forum | Wed Aug 07 01:41:27 EDT 2019 | orbitcoms
Hi I am having trouble getting solder bridges on TQFP-100 (0.5mm pitch) components. The boards are pasted on semi-auto printer using laser-cut 0.12mm stencil and SN63 NC257-2 T4 paste. The components are placed using Samsung CP40LV and tghen reflow
Electronics Forum | Fri Apr 17 09:39:07 EDT 2009 | rkevin
I received my sample jar of NC257-2 SAC305 from Aim, and while that may have been true about older Aim paste formulations, this stuff prints and reflows better than anything I have tried and more importantly there were practically no voids on a 256 B
Electronics Forum | Wed Sep 26 11:17:38 EDT 2012 | garym4569
We have been having a solder paste reflow issue which results in the solder not wetting to the LED lead. The solder appears to create "puddles" on the pcb pad. I have attached AOI image for review. We have had the pads analyzed for contamination, w
Electronics Forum | Fri Apr 04 18:16:43 EDT 2014 | garym4569
We are in the process of launching a new product and found reflow solder issue with one of the inductors. I have set oven profile to paste specifications. I just finished profiling with thermocouple under problem component. All other components ex
Electronics Forum | Wed Nov 17 11:20:23 EST 1999 | Dave F
Hey Gyver: If you don�t mind (which you don�t have any choice about, because I�m going to do it anyhow, cause it�s MY word processor), I�m going to respond genericly, but still be directed to your question. Much of the following is paraphrased from
Electronics Forum | Sun May 13 02:08:26 EDT 2012 | isd_jwendell
In testing 63/37 SnPb NC paste I have seen HUGE differences in performance. Have you tried a different paste? I prefer AIM (NC257-2), they have performed well in each round of testing. My observations regarding mixing old and new paste: The paste ha
Electronics Forum | Fri Dec 27 14:22:00 EST 2019 | ameenullakhan
Hi , Thanks..., Its "not wetting the pads sufficiently" We have tried with RTS , Our paste is ROL0 based chemistry. Which solder have you changed. Regards, Ameen
Electronics Forum | Fri Feb 28 15:27:50 EST 2014 | tombstonesmt
Good afternoon! Looking to see what everyone else in the industry is running for print speeds regarding type 3 solder pastes. Our paste is a type 3 with 11.5% ROL0 flux content. The finest pitch component in our case is .5mm pitch. Our screen print