Electronics Forum | Wed Aug 22 14:39:02 EDT 2012 | wendynguyen234
Our S-2000 pick & place machine has head 2 not picking up any nozzle & displays error code 8342(nozzle check error). In ANC setting, head 1 pick/put ok but not head 2; when "MANUAL" box is checked, clicking PICK/PUT then both head 1 & 2's status disp
Electronics Forum | Mon May 25 20:17:56 EDT 2009 | paligora
Hi , we have problems with the pick & place nozzle when assembling data switches on the PCB. The SMT switches have top surface with diameter of 2.6mm and our supplier is suggesting that if we need to replace the current nozzle which has oval suction
Electronics Forum | Mon May 25 21:27:07 EDT 2009 | paligora
Our machine is YAMAHA YVL88II and the issues we have with these data switches are either not being picked up from the feeder at all or are being ped before assembly.
Electronics Forum | Tue Apr 02 17:15:58 EDT 2013 | dontfeedphils
This is where I purchase nozzles for our Jukis. You don't have to purchase the entire nozzle assembly, just the tip and slider... http://www.nozzlesupply.com/juki.htm I don't have any affiliation with this company, just a happy customer.
Electronics Forum | Thu Jan 23 14:52:05 EST 2020 | jesusc
Hello, Does anyone knows how to perform AMF correction procedure? I need help in calibrating placement offsets. Recently we had an event where head 1 crashed a feeder and damaged it. We have already replaced the nozzle assembly and used a jig to ma
Electronics Forum | Tue May 23 02:41:37 EDT 2017 | zsoden
Thanks Bukas. I've actually gone to a lot of trouble over the past 24 months to completely clean, rebuild and adjust the pump and nozzle assemblies and even through all of that we've still never been able to get theoretical maximal wave height from t
Electronics Forum | Tue Sep 17 19:23:49 EDT 2024 | proy
I have a collection of Electrovert Econopak Parts I would like to sell, or find a home for. This includes - TITANIUM - nozzle/flowduct, Solder pot liner pump assembly. Also have stainless parts - we don't run a 2nd nozzle and only user the Lambda noz
Electronics Forum | Tue Feb 27 10:26:19 EST 2001 | jcboetcher
Hi I'm a first time user of SMTnet. I have a Electrovert Wave Soldering Machine Ultra 2000 with a AT&T Spray Fluxer. I'm looking for a upgrade or a replacement Spray Gum Binks Model No. Z-6-434 and or nozzles ( Fluid tip assembly No. 184A / 156A.
Electronics Forum | Mon Apr 17 22:54:51 EDT 2006 | Darby
Short answer is - not really. According to the manual in Chapter 1-5 Supply devices (Feeders) overview "There are also available an 8mm tape feeder which handles 1005(0402) square chips". I have never seen one. The problem is that even an H nozzle is
Electronics Forum | Sun Nov 12 17:35:40 EST 2000 | Darby
George, You need to calibrate your chucking assemblies! . What you are seeing is poor alignment due to egocentricity in you jawing assemblies. Also make sure that your jaws/nozzles are in good condition and that your assemblies are correctly orientat
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, CA USA
Phone: 5102268155
winsouce.jpg)