Electronics Forum: nozzle leaf (Page 1 of 1)

Philips Topaz not picking up nozzle

Electronics Forum | Wed Jun 10 01:33:20 EDT 2015 | leeg

Are the leaf springs in good order and set right? If they are then it could be calibration related.

CP6 Performance

Electronics Forum | Thu Nov 17 02:17:36 EST 2005 | ajay

CPH - we able to acheive max. 32k on few of our product. 0603 rejection - on big lot production lot max 0.15%. Maint - preventive we do on once in 2 month. Consumable - mostly nozzles, feeder top leaf, grease. programming - we use MCS & it is time co

Component Loss in CP643

Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs

for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c

Missing component benchmarking

Electronics Forum | Thu Mar 14 23:20:05 EST 2002 | alanwilson

Missing and misplaced components could be down to board supports set too high or too low. Check the ZO and make sure the deflection is set ok at various points across the board. Check the other usuals such as sticking nozzles, correct size nozzle for

CP642's vision process error

Electronics Forum | Wed Jul 30 11:11:11 EDT 2003 | Roger

Has anyone changed the PD on this part lately. Sounds like a program (PD) issue. Nozzle size should be .7mm. Narrow view should be selected. Tape leaf cover on feeder should be .7mm. Make sure parts aren't on the camera lens. Good luck!

Fuji CP3 Tape Leaf Sensor

Electronics Forum | Sat Apr 25 02:46:18 EDT 2009 | smellew

FYI SME offers a replacement Tape leaf detection system which covers the whole range of FUJI CP4-CP7 machines.its also very reasonably priced. It doesn't use Fibre Sensors or mirrors. it only has 1 adjustment which is height via Eccentric screw. even

0201 placement on Fuji CP4-3

Electronics Forum | Thu Mar 01 16:39:29 EST 2012 | triadelectronics

Our company is going to attempt to place 0201 components using our Fuji CP4-3 with the upgraded SMD3 vision system. Count On Tools is providing the 0.4 mm nozzles and we are using our 8mmX2mm feeders with the 0.7mm tape leaf (if it works at all we w

  1  

nozzle leaf searches for Companies, Equipment, Machines, Suppliers & Information