Electronics Forum | Wed Aug 22 14:39:02 EDT 2012 | wendynguyen234
Our S-2000 pick & place machine has head 2 not picking up any nozzle & displays error code 8342(nozzle check error). In ANC setting, head 1 pick/put ok but not head 2; when "MANUAL" box is checked, clicking PICK/PUT then both head 1 & 2's status disp
Electronics Forum | Fri Apr 02 09:50:40 EST 2004 | cedams
Yup. It was definitely checking the fiducials as well as the block skip marks and it used to work pretty well. What it did was started at the center of where the fiducial should be and scanned left. When it found a change in contrast it scanned righ
Electronics Forum | Fri May 10 01:32:01 EDT 2019 | vinitverma
If standard nozzles are not able to handle a component perfectly, you can always get a customized nozzle made from the datasheet. Let me know if you need help. You can write to me at vinit@prosem.in
Electronics Forum | Sat Feb 19 05:34:45 EST 2000 | Dane Stokes
Also Jan, Don't you have to send your components through a filter program when transfering from a 4796 to a 4791 or vice versa. I know you have to do this when transfering a 4790 program to a 4791 because the speed data does not transfer correctly. I
Electronics Forum | Sat Feb 19 05:34:45 EST 2000 | Dane Stokes
Also Jan, Don't you have to send your components through a filter program when transfering from a 4796 to a 4791 or vice versa. I know you have to do this when transfering a 4790 program to a 4791 because the speed data does not transfer correctly. I
Electronics Forum | Thu Feb 14 13:06:54 EST 2019 | compit
What is the best way to introduce a choke like from a drawing? Emerald often misunderstands the number of pins - pads have an irregular shape. Also with the lifting is a problem - for the nozzle 63 is too heavy and rotates when moving, the nozzle 64
Electronics Forum | Thu Mar 15 18:15:28 EDT 2018 | maustin
The 740 has been a great machine for us. We've been able to reliably load components as small as 0603 (we've not tried 0402, but I believe with a special nozzle adaptor, you can get it to work) and place a 7x7 56 pin QFN with 0.4mm pin pitch with hi
Electronics Forum | Tue Feb 01 10:17:32 EST 2000 | g cronin
I have been trying to get the fid recognition to work on the Universal 4785 chipshooter but keep coming up with errors. If anyone has any experience using fids on this machine and can give me some pointers please drop me a line... thank you greg
Electronics Forum | Tue Feb 01 19:22:11 EST 2000 | Jason Bentley
What kind of errors are you getting. make sure that you have the right size fid's and the color is correct in the program. This is the main problem that I run into and it usually corrects the problem. Make sure that it is looking in the right X and Y
Electronics Forum | Fri May 30 09:50:04 EDT 2008 | jdengler
Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry
