Electronics Forum | Wed Feb 15 14:25:34 EST 2017 | eslavine
Hello. Just called btu and they recommend BIRAL BIO-30. Couldn't find any distributor in Canada. Do you know any equivalent? Thanks
Electronics Forum | Wed Aug 08 07:47:04 EDT 2007 | dynamicsource
I just want to ask about installing automatic oilers for our Heller ovens. Currently, we have 6 reflows and 2 of them has the auto oilers. I would like to have the others to have the oilers too, either the auto oilers of Heller(hooked up with the hel
Electronics Forum | Wed Aug 08 15:02:04 EDT 2007 | slthomas
My preferred option is to call them on the phone!
Electronics Forum | Fri Sep 07 16:53:37 EDT 2012 | burb1999
We have Heller, 1707EXL now. It has a removable support for the mesh conveyor that just pull out (clipped in). Had an Electrovert and they were bolted on and very tuff to change out. The oilers Im not sure I care for though,they have a metal rail t
Electronics Forum | Thu Apr 27 11:12:32 EDT 2006 | tds
I have a Quad ZCR (4 zone) oven for $5,000. Edge/Mesh, auto chain oiler.
Electronics Forum | Sat Oct 17 18:20:53 EDT 2009 | fulldrawmike
if your pneumatic cylinders are sluggish, try putting a few drops of 10wt air line oil in one and see how it reacts. The seals get dry and just can't move or at least that is what I have seen on equipment that does not use air line oilers.
Electronics Forum | Sat Oct 17 18:43:56 EDT 2009 | emanuel
Just a moment.... when the machine was installed I was told to use a dry air line, so it is connected to a line that passes through an air dryer and no oiling at all. Should it have oiler installed? I will check the installation manuals
Electronics Forum | Wed Aug 03 11:08:24 EDT 2005 | PWH
We use the following stuff from "Biral USA": BIO30 Synthetic High Temp Oil � Chain Oilers NMG-400G � No melt grease - miter gears/lead screws AS500ML � Anti-size spray - lead screws, drive sprockets, rail support L-brackets It seems to work good
Electronics Forum | Tue Jul 09 15:40:06 EDT 2019 | assuredtech
That's a great point about air consumption, don't reduce the 1/2 inch air line requirement, meet the CFM air requirement and of course dry shop air. Check the Auto oiler for the CTA is running correctly, 5W 30 NON Detergent oil only. Attached is a pi
Electronics Forum | Thu Feb 19 15:17:52 EST 1998 | Bipin Napal
Available immediately. Call Bipin at 416-385-0855 Make: Electrovert Model: 500 CLV Electrical: 440V, 3Phase, 60HZ Manufacturing Date: Dec 22, 1992, and upgraded in 1994 Physical Size: Length 205.5�, Width 55� Heating Zones : 10 Upper & 10 Lo