Electronics Forum | Thu Apr 19 16:08:36 EDT 2012 | rodrigo
Hi all, I'm still trying to get our CP4 to work. I've found 3 relays with bad contacts but replacing them didn't help (weird). I'm trying to check the input lines to the Direct I/O PLC. Could someone take a picture of the LEDs (IN1-3 and OUT1-3) aft
Electronics Forum | Sat Mar 24 12:30:20 EDT 2007 | John B.
We're currently running a manncorp ECM-93, which has served us alright, but we've pretty much outgrown it. We manufacture power electronics, a lot of double sided designs with odd form parts. We have about 30 different designs we manufacture, and we
Electronics Forum | Fri Aug 18 05:47:22 EDT 2000 | Wolfgang Busko
About the status in Europe you can read this document. http://europa.eu.int/comm/environment/docum/00347_en.htm Around here are a lot of workshops, conferences, symposiums with a controversary tenor. It goes from "no problem " over "ridiculous" to
Electronics Forum | Sat Oct 03 00:52:23 EDT 2015 | dekhead
Have you checked status on main machine I/O (Node 2) on the rear of the machine? LED status? www.dekhead.com
Electronics Forum | Thu Aug 17 22:51:11 EDT 2000 | nellhylim
Anyone can update me the lead-free process?
Electronics Forum | Mon Aug 31 09:53:59 EDT 2009 | fujiphil
after sending all the datas.... proper, program and status... Re-boot the machine...
Electronics Forum | Sat Sep 25 09:00:59 EDT 2010 | slwolbert
I managed to bypass this issue by flushing FIP2 and sending status and proper back.
Electronics Forum | Wed Sep 05 02:05:47 EDT 2007 | jepoy
What are the status of the LEDs? Are these LEDs lighted up in RED? If so, the harddrive and the sub are disabled. You can enable these if you have the system disc. Insert the system disc, then, $ sign will appear. Type hdstat. This will display the s
Electronics Forum | Tue Feb 16 08:47:38 EST 2010 | jdengler
We powered up our CP-IV today and got an error. About 7 seconds after power on page 000 comes up with nothing in any of the areas except for second status area which contains "LD INIT" in yellow. After about 16 seconds the second display area gets
Electronics Forum | Thu Jul 03 09:27:10 EDT 2014 | torch
Hey guys wonder if anyone can help me, having an issue with our Quad QSP2, at the moment it is displaying Tep2 - Send Status command failed Tep1 - Send Status command failed and there is no response from the gantries, the interlocks appear to be wo
