Electronics Forum | Tue Mar 27 02:37:35 EDT 2018 | rob
Hi Thomas, Yes, we are pretty good at feeder maintenance, we gang pick on our Yamaha/Assembleon kit with no issues. On one of our older machines (YV112-3/Sapphire) we pick 12 LEDs at once per side of the machine. On a couple of jobs we exceed the ma
Electronics Forum | Thu Sep 19 16:58:45 EDT 2019 | kylehunter
So.. I thought I had fixed the issue, but it seems not. The issue that was causing the fiducials to not be found, I 100% have solved. The board was not reaching the stopper before being clamped, causing the board to be a few mm's offset. I added a de
Electronics Forum | Sun Feb 20 10:54:14 EST 2022 | compit
Opal XII, MG-1 (and substitites from Yamaha available in Asia). Unlimited spare parts, cheap feeders, etc. MG-1 is faster, better for service (opinion of a friendly serviceman)
Electronics Forum | Fri Jun 04 10:18:38 EDT 2004 | drlou
OK, I have some names to go by. I appreciate the info, especially the Quad related stuff, because my company was leaning toward the Quad, and I was concerned about its age and technology. I am going to look into the Fuji XP142E, the Samsung CP40/45,
Electronics Forum | Thu Jun 03 08:03:22 EDT 2004 | vinitverma
You can have a look at Assembleon (formerly PHILIPS EMT) equipment. They have equipment ranging from rated speeds of 6500cph to 150,000cph. I guess their OPAL XII should be the best fit machine in terms of its capability and speed both. It can do fro
Electronics Forum | Fri Dec 16 15:23:04 EST 2005 | Csabee
I think the Samsung SM320 is quite good machine..But I suggest that must assembly feeder cover to the feeder trolleys, because without that the tape feeders are not safe for the heads. Feeders should broke the head. chip components wrong light sett
Electronics Forum | Thu Dec 22 13:16:07 EST 2005 | Cmiller
You may want to take a quick look at the tier one equipment suppliers. Universal and Fuji have some very competitive equipment, not sure about Panasonic and Siemens but they have to be trying to compete as well. We are low volume and never thought we
Electronics Forum | Tue Feb 26 16:07:07 EST 2013 | kevslatvin
What vintage are the gem series you are running? We have some '06 Opal Xii's and place 0201's with them. Haven't tried 01005's. I know you said new but Cardinal Circuit has an auction gonig right now that has a 2010 Assembleon MG1 and a 2006 MG2 and
Electronics Forum | Fri Mar 24 17:04:28 EST 2006 | kevslatvin
We are looking into uprgading our current pick and place machine which is a very entry level machine with a higher class or more production oriented machine. On our current machine change over is fairly slow. I was wanting to know if any users of the
Electronics Forum | Tue Apr 10 02:57:53 EDT 2018 | rob
Yes I would, most of our old Yamaha machines (before 2005) will do 30-35 microns @ 3 sigma with the fine camera option. Our Jukis with His res camera's will hit it too. You should be OK with most things after 1997 with the right camera choice (whic
