Electronics Forum | Tue Apr 12 23:10:09 EDT 2016 | dhollland
Carlo - we do use that. I was asking about the lead check option to catch bent leads.
Electronics Forum | Tue Apr 12 23:44:51 EDT 2016 | cmarasigan
Try to increase or set to 100% the Lead Check Side (%) for every QPF part data.
Electronics Forum | Wed Apr 13 03:20:19 EDT 2016 | smtsparescn
Actually SMT mounter's vision system is similar as the AOI machines,it judges the right or wrong based on: 1.the black and white identification 2.it's measurements 3. the comparison between it's measurements and the input data There is a tolerance o
Electronics Forum | Wed Mar 23 09:32:34 EDT 2016 | dhollland
Can someone explain to me how the scan position of the lead check works and it measured? On our machine the scan position was at .2. I changed this to .1 and could not get a QFP to pass lead check. I then placed it at .25 and haven't had any failur
Electronics Forum | Thu Mar 24 16:46:29 EDT 2016 | tombstonesmt
The recognition system uses a image histogram for the lead tip check. So, perhaps you were scanning the area from the lead edge to .1-.2 towards the body of your QFP and not fulfilling the required pixel count for that area; increasing it allowed yo
Electronics Forum | Fri Mar 25 22:03:30 EDT 2016 | annabella
YANGLING SMT CO.,LIMITED Since 2005, 11 years experience China SMT pick and place parts supplier Paticipate NEPCON Shenzhen(2009-2015) Lots of CM402 nozzles on sale. Any interested in please follow me: Youtube: https://www.youtube.com/watch?v=5vvi80
Electronics Forum | Tue Apr 12 21:43:50 EDT 2016 | cmarasigan
There is an auto teach of QFP component for CM402 wherein machine can auto recognize number of pins, pin pitch. Just make sure on your part data you have selected the right reference part (Ref: 171)for QFP. For manual component recog; 1. Set Comp si
Electronics Forum | Fri Nov 01 20:24:15 EDT 2019 | dekhead
> Machine Setup >> Options >> TTG & BTG Enable
Electronics Forum | Wed Oct 30 13:30:54 EDT 2019 | tnachamp
The consumables monitoring option totally disappeared from one of our printers. It used to show the level of paste, paper and solvent and now that window is totally black. I was wondering how we could get that option back onto the monitor. Thanks in
Electronics Forum | Mon Mar 16 14:58:22 EDT 2020 | tnachamp
Thank you for the response. It is strange that the TTG & BTG option is available on our other DEK but is not in this particular DEK. Both machines have the same software and version.
