Electronics Forum | Wed Jun 16 11:49:55 EDT 2010 | tim_wright
A customer wants to coat a no-clean assembly to cut cost and cycle time. I know what wave flux I can use to make it work, but the Indium SMQ92J paste we use causes dewets. Any other no-clean pastes out there that play nice with acrylic?
Electronics Forum | Tue Dec 12 15:16:22 EST 2023 | proy
Yes we are in alignment of thought on this. Deciding on a value point of keep/toss is always a challenge - availability also comes into play - but this has improved over the last year. This is a matter of - when you do want to keep - short tapes/part
Electronics Forum | Tue Dec 12 15:08:37 EST 2023 | tommy_magyar
We are building our own products and we tend to keep our strips in bags. The same goes for bulk bags. What I would do, should there be no management issues, is to throw any bulk/strips of resistors and capacitors away, as any additional handling giv
Electronics Forum | Fri Jan 06 22:15:50 EST 2017 | sarason
Looking at your picture. Is this the first component in a reel with no tape header. If so that is your problem. Or is this a piece of cut tape that has been peeled and is sitting between a set of rails? sarason
Electronics Forum | Wed Aug 31 00:50:59 EDT 2005 | grantp
Hi, We have a new part we need to mount, and it's a .5 mm pitch BGA with .3 mm diameter pads. That's a lot smaller than we have done before, and we currently use 1 mm pitch BGA's with .5 pads. Has anyone does .5 mm pitch BGA's and what needs to be
Electronics Forum | Wed Aug 31 09:06:11 EDT 2005 | PWH
Agree with Siverts. We do a build that has 0.3mm pad diamter BGA (0.8mm pitch - distance from pad center to pad center) and 0.5mm dia. BGA balls. Stencil specs. are: 5 mil. thickness, square BGA pad aps. (1:1, 0.3mm square aps), laser cut. Seems
Electronics Forum | Wed Aug 31 11:02:28 EDT 2005 | Jason Fullerton
We are using one BGA that has 7 mil bumps on a 20 mil pitch. We use the manufacturer's recommended pad and aperature layout, which is an 11.8 mil square overprint on a 6 mil land. At 11.8 square, you need to use a 4 mil laser cut or a 5 mil e-form st
Electronics Forum | Wed Mar 12 16:04:24 EST 2003 | O' Connor
Everybody thanks for all your help, the problem has been solved. Before I describe the solution I've got to own up, I'm the PCB Design Eng., The Process Eng. lobbed this problem onto my desk last week, said the problem lay with the PCB finish, whats
Electronics Forum | Wed Jun 12 11:42:11 EDT 2019 | tey422
Actually, Mydata already had that similar design over 10 years ago, it's the aglilis feeders. It's easy to set it, and almost no spill parts at all if the operator do it right.
Electronics Forum | Tue Aug 13 09:58:19 EDT 2019 | proceng1
Kelvin, I have tried to reach you multiple times. The tracking number shows that the package has been sitting on your dock for over a month. I can't get anyone to answer the phone or emails.
