Electronics Forum | Sat Nov 26 02:58:37 EST 2005 | sumxp
It could be the servo pack. We shut down the machine sometimes back and lastly sold it. The servo pack doesn't last long. Anyway,good luck to you.
Electronics Forum | Fri Jan 11 12:09:14 EST 2008 | john_smith
Maybe you have the wrong waffle pack assigned to the machine. I don't have alot of experience with a f3 though.Are you using the UNIX based software?
Electronics Forum | Tue Sep 14 06:08:46 EDT 2004 | sc
The general control on QFP fine-pitch coplanarity is +3mils. suggest to look at the re-use of thrown out component from SMT machine. If the component pack in std pack, then most probably the lifted is due to processing, not incoming as the packaging
Electronics Forum | Mon Dec 07 09:43:09 EST 2009 | kpm135
Just to throw my two cents in the MY19 could be slower than the other my machines due to the greater distance the head has to travel to pick up and place the components.The longer distance could also account for extra wear and tear on the motors and
Electronics Forum | Wed Apr 05 14:49:51 EDT 2006 | Cristina
The leader tape from Sierra works good for us. But if you have to work only with small strips and you can't affort to lose any parts think of moving them into waffle packs. It depends though if your machine has a tray for that. Regards, Cristina
Electronics Forum | Fri Mar 19 03:50:37 EDT 2010 | grahamcooper22
Some things you have to be sure of... Can you guarantee the LEDS are DRY when you receive them ? They may be packed in dry bags but when was this done and has the LED distributor had them open at his site ? Using vacuum sealed dry packs is a good way
Electronics Forum | Wed Sep 04 14:14:31 EDT 2024 | charlie_cidp1984
Hi, I think that price UIC is acceptable, for example we have GC120 with full pack (145pcs) of feeders by 45 kUSD . Machines are in perfect condition.
Electronics Forum | Wed Jan 22 15:22:53 EST 2003 | davef
Hey "Dispenser Boy" does this mean we can have your machine? ;P I'll be out to supervise the packing with a Hook in my hand. Poke around the fine SMTnet Archives to get started on aperture design. 7525, Stencil Design Guidelines is pretty much of
Electronics Forum | Tue Feb 11 15:31:10 EST 2020 | sumote
We have not used out tray handler in several years, and when I had a need arise the thing now throws a Servo Error "MTU1 ALARM [11081010]. There are 4 servo packs in the cabinet. When I try to initialize/zero out the machine the 2nd and 4th servo pa
Electronics Forum | Tue Nov 05 09:21:18 EST 2002 | stefwitt
After all, you may want to consider a Flip Chip process. The chips are bumped with tiny solder balls while still on the wafer. You may present the bumped chips in Gel Pack, trays or Surftape to your Pick $ Place machine ( if capable for Flip Chip pl
winsouce.jpg)
