Electronics Forum | Thu Oct 19 09:39:41 EDT 2006 | wrongway
Hello all cm212 machine the max pcb size is 15.75 x 10 inches we have larger boards then that that was why we were looking at the cm402 model. as far as the feeders go we would be buying new feeders 8mm-56mm. I was also glad to here from someone th
Electronics Forum | Mon May 27 12:55:28 EDT 2002 | jgeissler
We are experiencing an increased amount of machine stoppage due to brittle 8mm cover tape. The issue does not appear to be feeder or part/manufacturer specific. Taking a foot of cover tape and pulling it from the ends results the cover tape snappin
Electronics Forum | Tue May 28 17:02:46 EDT 2002 | dougt
I've had problems with this in the past, pretty sure it was due to age. Had a couple of old reels of dummy parts that would not allow for any type of stretching of the cover tape. I have also seen where the cover tape appears to shrink and it pulls
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Wed Sep 23 12:18:58 EDT 1998 | Peter
| | I am thinking of purchasing a Panasonic MV series chipshooter. If you own a Panasonic MV machine I would like to hear what you like and dislike about it. Is the service good? Are spare parts readily availiable? Does Panasonic support and follow
Electronics Forum | Wed Apr 23 07:46:49 EDT 2003 | pbc1963
Bernard, The problem we have is when unloading the feeder several components may be lost due to the partial peel back of he cover tape. This area I am referencing just passed the point of the knife to the pick area. Also matching the correct feeder
Electronics Forum | Tue Sep 12 01:54:57 EDT 2006 | AR
I assume that you are referring to the same kind of mechanical feeders (older type) that are used on the Philips (Assembl�on) Topaz as well. First make sure that the right gear pulley spring is set to its stiffest position (the loop at the end of the
Electronics Forum | Wed Sep 18 14:58:59 EDT 2002 | Claude_Couture
Just to add my 2 cents on the adjustment of pitch on MPA feeders: True: Panasonic do not make it easy to change the pitch on MPA feeders, the thickness of a metal part is what sets the pitch. My solution: for example, I get a 24mm X 12mm pitch MPA
Electronics Forum | Sun Feb 06 15:38:39 EST 2005 | Grant
Hi, I think we would get a jam up every hundred parts or so, and it's worse in cover tape that's glued down. The problem is the Agillis feeders push the cover tape to the side, which works ok on 8mm tapes, but on wider 12 and 16 mm tapes it's a nigh
Electronics Forum | Thu May 26 09:11:06 EDT 2005 | russ
This 10 - 20% loss, is it 20% of 10 parts or 10,000? How many parts are lost from a "Perfect feeder teardown"? For example our Samsung 8mm feeders lose 8 components on 4mm pitch every time the cover is released. So if we had an 8 piece run that re
.gif)
