Electronics Forum | Fri Aug 04 05:10:57 EDT 2000 | Dougie
Hi, We use a mixture of plastic tape carriers and paper tape carriers for placing chip components. We are experiencing a problem which I know is a problem across the industry...when using the plastic carriers, the chip components stick to the tape c
Electronics Forum | Tue Aug 01 13:31:48 EDT 2017 | tey422
There is one thing to be checked too. That is to make sure the nozzle not going too deep when lower to pick up the part. I found a lot of picking errors issues are due to nozzle going down too deep into the pocket. If it does, it pushes the component
Electronics Forum | Mon Aug 07 04:25:00 EDT 2000 | dougie
Hi Guys, Thanks for the response. To answer your questions... The compoments we are placing and experiencing trouble with are generally 1206 components. It isn't just one manufacturer either. The one part though we have most problems with though is
Electronics Forum | Thu Aug 24 09:32:40 EDT 2000 | Stefan Witte
If this is a problem you see with all your paper tape, you may want to talk with your machine vendor. Sometimes a sharper blade in the feeder,which peels off the cover tape, helps to keep the carrier tape together.
Electronics Forum | Thu Aug 27 12:49:20 EDT 1998 | Frank S.
Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together?
Electronics Forum | Thu May 04 12:02:37 EDT 2017 | tombstonesmt
Splice in carrier tape left over or purchase leaders from suppliers like Sierra. http://tapesplice.com/product-category/flat-punched-carrier-tape/
Electronics Forum | Thu Aug 27 13:55:09 EDT 1998 | Dave F
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Frank: Check the archives for Tesa and Siemens. Dave F
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Wed Oct 15 15:52:36 EDT 2014 | davef
VTEK says …” Carrier tapes are made from three primary materials. (All are manufactured in accordance with EIA standards) 1 Polycarbonate is a black plastic material with excellent impact strength. It is used primarily for bare die and small form fac
Electronics Forum | Mon Nov 03 03:20:25 EST 2003 | magdelectronics
Hello Cal, I have left Tempo and started my own business. We manufacture a carrier tape like that of Surftape. Mag-D Electronics Adhesive Back Carrier Tape has a punched Blue Nitto Tape Gap and not two rails. Our Punched Nitto carrier is more acc