Electronics Forum | Fri Aug 03 17:00:57 EDT 2001 | mparker
Start with a definition of what you expect the AOI to achieve at each station. Will your in-line machine be post print? Place (pre-reflow) or post reflow? Rather than buy one very expensive machine to put at the end of the line, maybe a couple of
Electronics Forum | Tue Aug 13 11:40:57 EDT 2019 | raprite
Hi, I am actually analysing several AOIs for my company. I am evaluating an Omron one, Parmi one and Pemptron one as well. I want the AOI machine works as SPI as well. The only one that has this option (AOI 3D + SPI), is Pemptron one. Do you have
Electronics Forum | Mon Nov 22 22:16:18 EST 2021 | dontfeedphils
From what I remember it was pretty easy/straightforward. I'd grab an image of the bottom side of the panel from our AOI, scale it, and load it into the offline programming suite. Program flux and solder paths, then iron out the kinks online during th
Electronics Forum | Mon Jul 01 22:10:55 EDT 2002 | ianchan
Hi mates, anyone has practical hands-on experience for the "Vectron" AOI machine, model: K2-AOI? appreciate any hands-on experiences shared on this issue. seeking everyone's comments +ve or -ve about this machine, based on its : 1) user-friendly f
Electronics Forum | Tue Aug 27 12:56:45 EDT 2019 | surfacemountprocess
It really depends on the assemblies/components that need to be inspected and the available budget. 3D machines are much more reliable at detecting faults while not generating masses of false calls but of course they cost more than 2D machines. I ha
Electronics Forum | Thu Jun 02 08:21:57 EDT 2016 | buckcho
I will tell from my personal experience - I used Omron VT-RNS and it had issues, like the previous post. 0402 components, transistors and SMA's had problems, but when you have experience you can come up with some additional ideas (like look for the t
Electronics Forum | Fri Jun 15 10:26:12 EDT 2018 | ks0707
Hello everybody, I’d like to hear your advice regarding the programming for multiple Pick & Place machines. My company is a Contract manufacturer located in SF Bay area and has 4 SMT lines with 11 Pick & Place machines. The good thing is that all o
Electronics Forum | Tue Mar 03 16:14:37 EST 2015 | lokit
Hello, No experience with Mirtec, they are more populair in the States and Asia it seems. For my company, not only the inspection depth and reducing false fails was important, but also good costumer support. Keep in mind that if you have problems w
Electronics Forum | Mon Nov 11 14:20:25 EST 2013 | TM
Hi All I want to know if any of you have any inputs (good/bad) from the following AOI machines, I have no experience on any of these machines, so I want to know what is the general perception of them. Koh Young, Saki, Yamaha, Parmi.
Electronics Forum | Mon Mar 11 14:36:05 EDT 2024 | jergod
Thank you! Parmi is on my list because it has close support and service but i have been also hearing some bad user experiences from it. Koh Young seems to be really good option, only bad thing i have heard about it has been software bugs but maybe
winsouce.jpg)
