Electronics Forum | Mon Mar 26 18:25:09 EDT 2018 | tey422
As far as I know, the gang picking or not, it has to do with the pick positions. By what I mean is the X positions and Y positions have to as close to parallel for all those feeders in order for "gang pick" to work. If one of the feeder XY position
Electronics Forum | Thu Jan 18 09:31:47 EST 2018 | Robl
Hi All, Has anyone had any luck with gang picking the same part on Juki 2060 or FX1R's? Example: 100nf 0402, we can pick this part simultaneously from 8 feeders at once on our Yamaha's (or 12 on the old Sapphires), but on the Juki's we don't seem t
Electronics Forum | Tue Jan 23 07:42:25 EST 2018 | robl
Hi James, Thank you for answering. We can simultaneously pick multiple different part numbers with no problem, but we cannot generate programs simultaneously picking the same part number from multiple feeders on our Juki's. We can on our Yamaha's.
Electronics Forum | Tue Mar 27 10:12:16 EDT 2018 | jandon
Does the component supply count setting do the trick? We have picked simultaneously same part number in two different feeders with our KE-2020L.
Electronics Forum | Mon Jan 22 05:01:42 EST 2018 | smtspareparts
when encountered the material that should be picked simultaneously but actually not,just stop the machine when the mounter head moves to that feeder and move the pick up coodinator with HOD,till it is picked simultaneously, James http://www.smt-pre
Electronics Forum | Mon Mar 19 09:24:46 EDT 2018 | grek
Hello, try to find Operation options on your machines And try to find something like: Treat the same components as alternatives feeders. I know only 2070/2080 but it could be similar. Not sure if this is what you need but you can try
Electronics Forum | Fri Mar 23 08:42:18 EDT 2018 | georgetruitt
Rob, Can you add a suffix at the end of the part#, part#-1, part#-2, part#-3 (or use the feeder location part#slot123) and so on? Create those part# in the library. The machine will treat them as unique part#’s. You might be limited to a certain #
Electronics Forum | Fri Mar 23 04:57:26 EDT 2018 | rob
Hi Vojtěch, Thanks for taking the time to respond, I appreciate it. Yes we have the same options, but if you want to pick from the alternative feeders at the same time you have to use different part numbers. If you want to pick from alternatives w
Electronics Forum | Tue Mar 27 02:37:35 EDT 2018 | rob
Hi Thomas, Yes, we are pretty good at feeder maintenance, we gang pick on our Yamaha/Assembleon kit with no issues. On one of our older machines (YV112-3/Sapphire) we pick 12 LEDs at once per side of the machine. On a couple of jobs we exceed the ma
Electronics Forum | Thu Aug 10 11:55:18 EDT 2017 | emeto
I am going to implement a part number system in our production. Still debating what is the better approach. Does anyone use intelligent part number system(where numbers integrates part package, value, tolerance, carrier, voltage requirements....)? I
