Electronics Forum | Wed Aug 30 03:58:26 EDT 2006 | Ola
Yes you do need a different upline interface card. This information should be in Your Technical Reference Manual, Electronics enclosure chapter 6? Y2 Enclosure, card position X8 Downline and X9 upline: Part No Description. 112045 Base Card
Electronics Forum | Tue May 07 10:14:00 EDT 2013 | tanderson
I'm trying to minimize the loss of parts due to dropped parts. Part of the problem might be I'm filling in until we replace the SMT supervisor/manager. Some dopped parts are expected and are so inexpensive it's not worth fussing over. Sometimes I fee
Electronics Forum | Fri Nov 21 07:57:40 EST 2014 | deanm
Everyone deals with a number of loose SMT parts during production. These usually come from machine attrition (dumped parts), a few parts that are lost during feeder tape changeover, dropped inside the machine, etc. I will categorize them as: A. Ide
Electronics Forum | Wed Jan 19 19:54:42 EST 2000 | g cronin
I am looking for some misc. parts for a universal 4785 or newer. If anyone knows of one that is being parted out or of a company who has good spare parts inventory please let me know. Unfortunately buying parts directly from universal can sort o
Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t
Electronics Forum | Wed Aug 28 10:51:27 EDT 2002 | edmentzer
We use a manual "pick and place" unit similar to the OK product, and it work great. The parts are in a tray and the operator moves the pick up head over the part and press down which turns on the vacuum, the vacuum is turned off when the part is pla
Electronics Forum | Fri Jan 17 15:47:28 EST 2003 | davef
There is no documentation like you seek. The life of your part in storage is primarily a function of: * Quality of the part fabrication process. * Ingenuity and diligence you apply in protecting the parts from the environment. You need to: * Handle
Electronics Forum | Fri Sep 10 14:25:07 EDT 2004 | Claude_Couture
We had the same problems a few years back. We complained and they came back with the excuse that the supplier of the parts had made a bad batch. They sent us a new part in exchange of the broken one. When faced with premature breakage of parts that a
Electronics Forum | Wed May 10 13:21:58 EDT 2006 | scombs
Thanks for the reply. We have carefully inspected the part and solder joint after depaneling and all looks good. What is weird is if you remove the part from the board and check continuity with a meter you have a dead short. If you put on a new part
Electronics Forum | Thu Jun 28 11:01:47 EDT 2007 | mmjm_1099
Hello all, I have a question in regards to part tolerance on parts. I called Fuji (not doubting them at all here just looking for more insight here) and asked them what the usual % tolerance on parts is. They came back with 30% of a part and the tole