Electronics Forum | Mon Dec 02 10:33:46 EST 2013 | sarivong0914
Hello all, We have a Samsung CP45FV Neo, and I'm having problems with the operating software. I have a PCB with 2 different rev's. Rev. A boards was programmed to run Vertical. Then Rev.B boards are horizontal but was programmed to run vertical.
Electronics Forum | Wed Aug 11 16:30:31 EDT 2010 | swag
Sounds like your PCB count is set at 2. Many times 0 is setting for continuous use. Another cause could be that your SMEMA is not working properly with your downstream conveyor and the machine thinks it can't allow another board into the worknest.
Electronics Forum | Tue May 25 15:39:56 EDT 2021 | jamesatqkits
Hi Bukas, thanks for taking the time to respond. Drive is in good shape, everything seems OK. The first thing I did was make a copy of the drive. I should check all of the PCB's and make sure they are seated properly. The Samsung part of the assembl
Electronics Forum | Thu Oct 27 13:46:36 EDT 2022 | proceng1
I concur with what Tom said. Sometimes you have to trick the machine. Without seeing your board, I can't offer any specific advice. And I am not familiar with your machine, but we run SAMSUNG machines and between those and several different MPM Pr
Electronics Forum | Tue Aug 06 16:18:23 EDT 2019 | peacheas
Hi, i am looking for Multi scan vision board IM02 to the stencil printer like on foto. Our camera in printer has stopped working. And now we just looking for this "main" board for camera. Does anybody know about some stock where i can buy
Electronics Forum | Wed Jul 08 23:07:18 EDT 2020 | tylerrobertson
Hello, Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA Was able to get the board to power up and flas
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Wed Apr 01 10:52:59 EDT 2015 | superlen
Oh, I forgot to add a sample of what my export looks like. Note: that I don't have anything in the VERSION block & I wonder if this might be a problem. [VERSION] [PCB] Unit System = MILIMETER Coordinate = LOWER RIGHT Rotation = 0 Placement Ori
Electronics Forum | Wed Feb 07 09:46:20 EST 2001 | pjc
I need some guidance here. I've got a new board w/ a FBGA-48 package, Samsung CMOS SRAM. It's a full matrix BGA w/ 0.30mm-0.40mm ball diameter @ 0.75mm pitch. Balls are eutectic. PCB land diameter is 0.4mm. There are TSOP I 0.5mm lead pitch component
Electronics Forum | Fri Apr 17 06:00:13 EDT 2015 | sarason
Dear Superlen, I noticed this post maybe a little late, but I seem to recall an email conversation with a user that mentioned a bug in my SSA format in PCBSynergy. So I checked back through my source and here is an example of the first part of the
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
