Electronics Forum | Fri Jul 06 10:18:02 EDT 2007 | blnorman
According to IPC-A-600, measling can occur in epoxy-glass boards when the moisture content of the board is above 0.3wgt%. Is this the industy acceptance standard for max moisture content of a board?
Electronics Forum | Mon Jul 16 12:03:42 EDT 2007 | davef
We're aware of no industy acceptance standard for max moisture content of a board. For more on moisture levels, get a copy of: "Removing Moisture from Electronic Components and Assemblies", CS Leech, Jr, Circuits Assembly, May 1994. The article disc
Electronics Forum | Mon Dec 31 09:00:06 EST 2001 | davef
Baking before assembly does nothing good. It: * Increases costs. * Adds steps to the process and makes scheduling more cumbersome. * Increases the amount corrosion on solderable surfaces. We used to bake to remove the moisture from boards that caus
Electronics Forum | Tue Oct 19 22:43:31 EDT 1999 | Stu Leech
We are deeply involved with this question because we have developed a much faster way to remove moisture from PCB's. PCB's absorb varying amounts of moisture at differing rates. The rate is influenced by the laminate type board configuration , loca
Electronics Forum | Thu Jul 27 16:06:18 EDT 2006 | chrisgriffin
You will have to be more specific about your boards and process to get any help. There are many different types of in circuit tests and functional tests throughout the manufacturing process. The nature of these tests depend on board function. Sinc
Electronics Forum | Mon Aug 22 15:57:28 EDT 2005 | pr
Is there a test to check for delamination on a pcb? We are looking at new board houses and along with our standard solderability tests my boss wants to test for delamination. thanks, pr
Electronics Forum | Thu Jan 02 11:35:30 EST 2003 | Richard
Cleanliness test � �Area Grid Arrays�. Evaluation of residues� resistivity in a specific location on the board. (As compared to �Solvent Extract� evaluation.) We are: SMT assembly, using standard �water soluble� process with micro BGAs (example: C
Electronics Forum | Thu Jul 27 16:54:46 EDT 2006 | pjc
In-Circuit test, or ICT, is the most common method of electrical test for an assembled PCB. It is the most comprehensive and accurate method to ensure that both the PWB and components are working to specification. Not all components however can be el
Electronics Forum | Sun Jul 29 21:23:27 EDT 2001 | nifhail
When carry out the contamination test,do we measure for Chlorides on water soluble and No-clean fluxes? 1) What is the equivalent factor for machines developed to test the board cleanliness, Omega-meter vs Ionograph vs Zero-ion. 2) What values do we
Electronics Forum | Thu Sep 01 18:53:08 EDT 2005 | Board House
Pr. I agree with some of the above responses. if you are seeing Delam issues with incoming PCB's the following should be check. 1) Check the OEM Print to what Material they are calling out to be manufactured with. 2) If they are calling out for S
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830