Electronics Forum | Mon Sep 06 04:42:18 EDT 2004 | KenF
Thx for the replies. Acutally I am doing a process related study to see whether the process (pcb depanelling)can induce crack to an MLCC. After depanelling, I will do a thermal shock on the MLCC based on IEC 384-1, that is, five cycles of 30min at hi
Electronics Forum | Wed Feb 05 05:29:33 EST 2003 | Rajinder Sharma
If you are facing problem of craked capacitor only after breaking of the panel into individual PCB's, this may be due to stress being generated on the capacitors terminals. The stress may be due excess pressure being applied on the panel for breaking
Electronics Forum | Wed May 22 10:14:08 EDT 2019 | emeto
Matt, we did the study and YES perpendicular to the V-score is the worst case scenario. We did a cross section and confirmed component is cracked. If you don't have power over PCB design, the easiest way is to change board panelization or even order
Electronics Forum | Fri Mar 03 16:05:42 EST 2006 | Chris
Hi, Anyone ever perform a DOE on prepreg glass bundle direction or glass bundle grain and how or if it affects PCB warpage and chip component cracking at V-score depanel? Since most FR4 and prepreg has has 1.4 times more fiber bundles in one direct
Electronics Forum | Tue Mar 25 14:05:16 EDT 2008 | flipit
X7R >Z5U,Y5V. Y5Vs crack more than NPOs. Ceramic resonators crack often as well. I found that the chop style like the Fancord VPD5 is the lease stressful of the V-Score cutters. We have run as close as 0.025" to the edges with 0805s with no crack
Electronics Forum | Mon Mar 03 05:35:21 EST 2003 | Kelly
We just had this issue a couple months ago with a single sided FR-4 board which was scored. We found that the design was a factor but also the depth of the v-score. Since then we have re-designed the part further away from the score line. At the same
Electronics Forum | Tue Jul 09 22:12:03 EDT 2019 | eddy2019
The price increase of electronic components such as MLCC has not stopped. In recent years, driven by the development of electric vehicles, industrial control and other industries, the demand for MLCC products has increased rapidly. However, the overa
Electronics Forum | Fri Jun 03 10:11:08 EDT 2016 | tnisbet
If you end up buying a depaneling machine/robot, > the guys at Pentagon EMS are very good at making > fixtures. Once they have the specifications of > your machine all you will have to send them is > your panelized drawing of your board. In extre
| 1 |
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
