Electronics Forum | Thu Feb 24 23:01:30 EST 2005 | smtuser1234
One other thing to check is your PEC camera. Universal uses a jig to calibrate this camera but you could check it using this method. 1.Run about ten 0402 parts on tape with the PEC camera off and check placement. If the placement is off change the x\
Electronics Forum | Wed Sep 07 15:21:15 EDT 2005 | PWH
You are having problems with the PEC (fid. recognition, etc.) camera, correct? Not that camera(s) on the base machine (2.6 mil, 4.0 mil, etc.). If it is the PEC camera you are talking about I don't know much but if it's one of the other cameras I m
Electronics Forum | Thu Sep 02 11:44:37 EDT 2010 | swag
No, red light should be what you see from a PEC.
Electronics Forum | Tue Jul 19 14:03:03 EDT 2022 | ttheis
Reading up I see there is a fixture (part# 1212100) but I am not able to find any information on this. Has anyone ever adjusted the focus of the PEC camera? Anyone know what this fixture looks like? One of our machines is out of focus but still able
Electronics Forum | Thu Sep 08 03:45:22 EDT 2005 | geb
Yes, unfortunately it is the PEC camera which checks Fids and is used for Feeder Teach. I have found that you do need a service check before you can register with UIC. Do you have access to their database still? Thank you
Electronics Forum | Mon Aug 20 07:31:26 EDT 2007 | dilogic
We have GSM1 running on USOS V1.4.14. Is there a way to change default light levels for PEC (down looking camera) during feeder teach? Whatever I tried, it is always set to some default level... - Dejan
Electronics Forum | Fri Sep 09 06:08:39 EDT 2005 | geb
I think it may be the card thats causing the problem. When both machines are set to display a live image, the faulty machine shows pink/red. When their cables are pulled out of the card the working machine shows grey/noise and the faulty machine stay
Electronics Forum | Thu Sep 08 09:41:51 EDT 2005 | PWH
If you do find your camera is bad, I think they are relatively easy to replace if you get a new one. I have done a 1.0 and 4.0 GSM camera replacements but not a PEC as of yet. If it's like the 1.0 and 2.6 and 4.0's, likely it is not tough but will
Electronics Forum | Mon Mar 07 18:23:30 EST 2016 | ttheis
Hi everyone, I'm about 90% to running production on my gsm but I'm not able to get the machine to look at fiducial marks and make corrections to the placement. When I run advanced board configuration and seek to the first fiducial the pec camera tra
Electronics Forum | Wed Sep 01 14:59:12 EDT 2010 | eezday
I've been working to bring a Universal GSM-1 back to operational readiness at a university. I have lots of pnp experience but little on the GSM. The software is at 3.2.3. When I try to manually "zero the board" in the PWC menu I get only a black s