Electronics Forum | Wed May 05 16:12:30 EDT 2010 | thanh
after calibration, now i'm having an issue that placement between lazer and camera off about .5mm on the Y mount. if parts go to camera, the placement are good. but parts that placing with lazer it off about .5mm at Y for all rotation. anyone seen t
Electronics Forum | Sun May 16 00:07:58 EDT 2010 | tpappano
I have a Philips CSM84VZ. There are offset calibrations that compensate the X and Y distances from the camera to the heads and the beam pointer. Perhaps yours is similar and just needs a small Y adjustment for the beam pointer.
Electronics Forum | Tue Jun 01 15:06:40 EDT 2010 | thanh
I did. Nothing change. I can go in mount feed back and increase .5mm for all rotations(Lazer mount feed back), then it work. But all my parts go to camera will be off the oposite way.
Electronics Forum | Mon Feb 14 14:59:44 EST 2000 | hany a. salam
Hello there: We urgently need a 45mm FRONT CAMERA to be installed on a Philips pick & place M/C. The M/C model is EMERALD & it is one of the GEM line series. The camera should manage to visualize the BGA components. Please if anyone can give a hand
Electronics Forum | Mon Feb 14 16:53:43 EST 2000 | Carol Aviles
Mr. Salam, By contacting Philips at 1-800-4Philips (1-800-474-4547) our technical support group will provide you with free technical support regarding your Emerald and camera requirements. Regards, Carol Aviles
Electronics Forum | Wed Sep 14 12:54:48 EDT 2005 | Lasse H.
We have invested in a Philips Comet mounting machine and we are astonished to find out that the Philips Comet are being programmed manually by vision-cameras or by a eksternal software which cost like 16000 $. We have taken out some of the files and
Electronics Forum | Sat Feb 01 04:49:59 EST 2003 | testing
Hi, We currently have several AOIs on our production/test line which I feel as an engineer, are not being used to their true potential. Does anyone have any ideas on how I can improve their use i.e SPC, Placement in the production line etc since we
Electronics Forum | Sat Oct 31 09:45:48 EDT 2009 | meritajs
Hello Jeffrey J I could share our experience in using used P& P machine type Philips (Yamaha) and Juki (Zevatech) We had three machines Philips (Yamaha) vintage about1990g, which work till now. They have same type of feeders, which is simple to find
Electronics Forum | Wed Sep 09 08:28:56 EDT 2009 | thanh
have you try to adjust lighting level . are there any object over the camera??? try to clean the camera len and adjust focus, see any help.
Electronics Forum | Mon Jan 31 17:57:28 EST 2022 | compit
In my machines (Yamaha / Assembleon / Philips) there is an option to FIRST rotate the element and then check it with a camera (I do not use it, because it requires an additional better camera) - maybe you will find something like that at home?
