Electronics Forum | Thu Aug 04 21:20:50 EDT 2011 | jeffr
Is that Philips CSM60 ? (Old Yamaha machine)
Electronics Forum | Fri Jun 16 07:58:22 EDT 2000 | Wolfgang Busko
What�s your problem ? Wolfgang
Electronics Forum | Thu Sep 24 06:48:55 EDT 2015 | tercel
Thank you for the fast response and help! Machine runs fine again!
Electronics Forum | Wed Sep 23 08:29:19 EDT 2015 | tercel
Hi, I read about the problem "243 x drift adjustment no good" on a Philips CSM 60 (my type) and other machines of this type. I have the same problem but no manual for the machine to solve it. Do you still have the manual where the "Drift ajustment" i
Electronics Forum | Thu Jun 15 15:43:48 EDT 2000 | Sergey
Is anybody who have some experience in working with CSM60 P&P machine with vision system?
Electronics Forum | Thu Sep 24 06:50:47 EDT 2015 | tercel
btw: Pots are VR16(x) and VR 17(y) on the left board and VR17(r) on the right board.
Electronics Forum | Thu Sep 24 07:07:44 EDT 2015 | ermani9
Great News!! Happy to hear!! Yes. Location of these ports vary for different Models of control cards of machine.
Electronics Forum | Tue Feb 15 14:25:08 EST 2000 | Sergey
Dear Sirs Good business day! I need the following feeders for CSM60 machine: - Stick feeders: 1. 20 mm x 1 2. 13 mm x 3 3. 8mm x 7 - Tape feeders: 1. 16 mm, 9" x 7 you seems to be have not this 2. 24 mm, 9" x 3 3. 32mm, 9" x 1 - Manual tray feeder
Electronics Forum | Wed Feb 27 10:51:34 EST 2002 | rkey
Does somebody have a copy of the CSM Toolbox & CSM optimzer for the CSM60 and CSM60V. Lost my copy! And can't contact PHILIPS EMT because it doesn't exist anymore !! (www.emt.philips.com) Please help or maybe some other software package would do th
Electronics Forum | Thu Sep 24 00:52:41 EDT 2015 | ermani9
Hi.. Move the XY arm to the center of the machine. Turn on the servo then immediately hold “LOWER” then press “ORIGIN”. You should see the message now on the screen “DRIFT CHECK”. The arm will start to drift without an emergency condition occurr
winsouce.jpg)
