Electronics Forum | Tue Feb 07 11:39:38 EST 2017 | prdmm1
YES. I am having problems with all the Panasonic parts we use. I was wondering if this is common. I have checked the package and tool and everything. It is the larger Panasonic parts that give me issues. I will try to pick out of tape in the y wagon.
Electronics Forum | Tue Mar 27 02:37:35 EDT 2018 | rob
Hi Thomas, Yes, we are pretty good at feeder maintenance, we gang pick on our Yamaha/Assembleon kit with no issues. On one of our older machines (YV112-3/Sapphire) we pick 12 LEDs at once per side of the machine. On a couple of jobs we exceed the ma
Electronics Forum | Tue Feb 07 09:54:25 EST 2017 | rgduval
Are you having any issues with other ERJ series resistors from Panasonic? Any other 2010 resistors? There is, very likely, something specific to this part/package/packaging that is causing your problems. Things to check: -Identify where the issue
Electronics Forum | Wed Feb 08 12:18:18 EST 2017 | dyoungquist
It could be a part height issue. I have seen a case where an 0402 resistor from 2 different manufactures had different heights. If the height of your 2010 part is taller than you have programmed in the package data, the pick up head may be pushing
Electronics Forum | Tue Oct 28 13:47:49 EDT 2014 | cbeneat
Hedge, Exactly why I posted the last. I read the Forum daily on all machines/issues, not just the ones we use, no telling what you'll pick up along the way:)
Electronics Forum | Wed May 26 12:20:38 EDT 2010 | emrtech
we are currently running 0201 components using the c-14 tool on the my9 pick and place and are having a lot of missing components with in the PCB's. is anyone or has anyone had this problem? if so, were you able to finf a fix for it?
Electronics Forum | Wed Nov 04 21:18:23 EST 2009 | isd_jwendell
I only have first-hand experience with 2 pick-n-place machines, but both used a small pressure puff to insure part release. I haven't seen any software settings for this, but a small solenoid valve was dedicated to the operation. I recommend you look
Electronics Forum | Thu Jan 13 22:45:50 EST 2022 | tey422
Seem like extra soldering would really helps it. Adding solder beads by using pick & place machine is more of a consistent way to add extra solder where you need it the most. No matter how you modify the stencil, there is still limits how much you ca
Electronics Forum | Fri Jun 29 15:57:24 EDT 2012 | stentech
This issue can be common on such large size boards. The newer laser we use today to cut stencils are generally accurate to +/- 5microns X and Y. Probaly way more accurate than your board which will have a +/- into thousands of an inch. Try send a boa
Electronics Forum | Tue Jan 04 17:08:34 EST 2022 | tey422
I used to work with boards with similar parts like it. There are two key things to do to reflow it. 1st is to have extra solder, which by adding solder beads using pick & place machine to place on top of the solder paste. 2nd is to have the using th
.gif)
winsouce.jpg)