Electronics Forum | Sat Oct 22 13:37:46 EDT 2016 | greglac
I am currently working on a custom IC where we plan on using Cu pillars at 80um pitch. I'm am trying to narrow down a packaging solution. My requirements are as follows: 40um Line Width/Space Capability (or finer) 4 layers low loss at mm-wave
Electronics Forum | Mon Jan 28 00:48:21 EST 2002 | peterson
Being in the backplane biz, we too, encounter similar problems...especially when our customer reads the IPC as Biblical (you will achieve 75% fill or be turned into a pillar of salt). Anyway, recently, one of our process engineers suggested paste-hol
Electronics Forum | Thu Nov 13 11:45:04 EST 2008 | pbarton
We have seen a similar problem. Turned out to be mechanical stress on the component caused by the method of location and clamping at ICT. Where is the component located on the assembly? Poorly adjusted clamping pillars on clamshell fixtures can cause
Electronics Forum | Fri May 18 13:50:38 EDT 2007 | realchunks
Hi Grant, Replacing a wave witha spot solder? You must have very few comonents to solder or all day to solder them. Why are thinking of doing this? Well, I have looked at just about every selective machine out there. What it all boils down to is
Electronics Forum | Tue Jan 16 20:34:17 EST 2007 | davef
DAVE�S BOOKSHELF ASSEMBLER�S ESSENTIALS Title: Soldering in ElectronicsAuthor: RJ Klein WassinkPublisher: Electrochemical PublicationsISBN: 090115024XPublication date: December 1989 I know, I know. The book was written in 1989!!!! I use this b
| 1 |
winsouce.jpg)
.gif)
