Electronics Forum | Fri Sep 15 12:30:05 EDT 2006 | Steve
If the package is robust enough to handle surface mount followed by a pass through the wave soldering process, we have had excellent results populating the fine pitch parts with the P&P machine, reflow, then mask the solder joints prior to wave solde
Electronics Forum | Thu Sep 14 11:33:39 EDT 2006 | Brian
Is it possible to wave .02mm fine pitch? I get excessive bridging. Any ideas welcome. Thanks Brian
Electronics Forum | Thu Sep 14 11:56:47 EDT 2006 | russ
I think you have your pitch wrong but anyway, I have never had success with wave soldering anything less than 50 mil pitch. On a QFP I have had good luck on three sides of 25 mil but never all four sides and without defects. Mask 'em off and hand s
Electronics Forum | Mon Sep 25 08:15:53 EDT 2006 | egrice1@wi.rr.com
Most companies are double sided paste and reflow, then selective soldering the thru-hole. This will give you the best results and with much more consistency than with Wave Soldering.
Electronics Forum | Fri Sep 15 05:37:49 EDT 2006 | Rob
Are you talking 0.02" (1.225mm) if so then no it's not a great idea. if you must wave it can you go to a PLCC and through hole socket it on the other side of the board?
Electronics Forum | Fri Apr 27 08:19:04 EDT 2012 | jim_n_hky
Can anyone offer guidelines on DFM and process recommendations for soldering .050" pitch connectors in the wave. The initail design had .026" drill with .043" pads so only .007" between pads. I requested .035" pads, but this still only leaves .015" b
Electronics Forum | Fri Dec 07 02:53:26 EST 2012 | beta
no expert but would using a smaller diameter nozzle help in anyway?
Electronics Forum | Fri Dec 07 02:55:24 EST 2012 | aj
I am no expert but would using a smaller nozzle help in anyway?
Electronics Forum | Wed Dec 12 16:16:39 EST 2012 | tombstonesmt
Nitrogen at nozzle supply is at around 47.5cfh.
Electronics Forum | Tue Feb 26 14:39:19 EST 2013 | eniac
Hi, guys. Does anyone use a EBSO selective soldering machines? Can you write your parameters for two rows connector? Thx!