Electronics Forum | Wed Nov 24 07:59:20 EST 1999 | Scott Cook
Jim, If you seek a non-Unix or non-Unix legacy software system, Take a look at pointman / pivot point. Point your browser to http://www.pivotpoint.com/pivotpoint/pointman/index.htm. Scott Cook scook@smtnet.com
Electronics Forum | Fri Sep 17 08:05:26 EDT 2004 | mark783
Is anyone aware metal squeegees for Dek Mk1 printers. It is an old printer with a pivot head. Does Transition manufacture a retro squeegee?
Electronics Forum | Mon Nov 06 14:21:09 EST 2000 | Kevin
Masking thickness can also play a factor in tombstoning (or the Manhattan Effect). If the pad is 2 mils or more below the surface of the masking this can create a problem. Depending on the thickness of the solderpaste deposition, the solder height
Electronics Forum | Fri Nov 10 04:53:52 EST 2017 | vinitverma
Normally when you just rotate one of the boards (circuit) by 180 deg, you'll find all the placements shifted by complete board length in X direction. This is because the board is rotated 180 deg with the board origin as the pivot. So you'll need to a
Electronics Forum | Thu Mar 12 21:14:16 EDT 2009 | davef
Mask: * I/O connector contact surfaces * Bus connector contact surfaces * Configuration jumper blocks * Test points * Surfaces that contact heat sinks (heat sinks are removed prior to coating) * Board mounting holes * Adjustable potentiometers * P
Electronics Forum | Fri Nov 13 11:41:37 EST 2009 | gregcr
Hi All, I am implementing a proper feeder maintenance program for my HSP chipshooter feeders. I have the calibration jig. I am developing a procedure with the following general steps: 1. Cleaning 2. Visual Inspection / Repair 3. Calibration / Testi
Electronics Forum | Wed Jan 17 11:21:29 EST 2007 | BillW
I have been using overall combined DPMO of SMT PCBAs as a performance metric. All defects are recorded down to component location and defect category. The resultant defect data table is analyzed with detailed pivot tables, defect type and defect loca
Electronics Forum | Tue Apr 17 21:05:06 EDT 2001 | davef
So, we�re talkin� �bout the smaller end of a "large" paper clip after it�s unfolded once, eh? In keeping with your "nothin� up the sleeves" full disclosure, I�ll bet you�re feelin� a little sheepish about not tellin� us about: * Antenna pad dimen
Electronics Forum | Mon Aug 02 09:26:15 EDT 2004 | davef
Q1: How do you define torque setting for screw? A1: Talk to people at your nut supplier. Some nut suppliers post torque tables on the web. For instance: http://www.thelenchannel.com/1torque.html http://www.marfas.com/Ttorque.shtml http://www.pac
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
| 1 |
