Electronics Forum | Fri Jan 08 15:56:37 EST 2016 | deanm
We received a contract job that requires a board with a heat sink integrated (glued onto the top layer) and the heat sink needs to be powder coated. So I need a board vendor that can provide: Multilayer board fab, Heat sink fabrication, Powder coat t
Electronics Forum | Fri Jan 08 16:08:38 EST 2016 | hegemon
That might be tough. Board houses typically stick to boards. You might find a board house that already works with a vendor that can supply Powder coated heatsinks, and the Board House might integrate for you, but it doesn't sound like one stop sh
Electronics Forum | Mon Jan 11 13:13:16 EST 2016 | rdubya71
Contact Randy Langston at sbcinc.com or email me and I can get you in touch with him.
Electronics Forum | Mon Jan 11 08:46:51 EST 2016 | deanm
Yes, I agree that finding a vendor that can do fabrication plus the metalwork may be difficult. I am open to those board vendors who have relationships with others who can do the metal for them and then ship the final product to us. There must be so
Electronics Forum | Fri Apr 17 14:08:00 EDT 2015 | davef
Humiseal says, "UV cure – These materials are also more difficult to repair as they are the most chemically resistant and mechanically tough of all conformal coatings. Removal is possible locally by using powder abrasion."
Electronics Forum | Wed Mar 04 08:32:45 EST 2020 | stephendo
We bought a conformal coating removal machine AKA a sand blaster at an auction. It is a CCR2000 especially made to be ESD safe. Does anyone have any experience with sandblasting conformal coating? We mostly use humiseal 1A33 and UV40. When we use the
Electronics Forum | Mon Sep 25 10:34:31 EDT 2006 | valuems
Thanks for the input, but ken that would cost a small fortune. But wouldn't it be nice if a machine had powder coating on all surfaces?
Electronics Forum | Fri Apr 29 15:14:52 EDT 2022 | glasscake
second the kapton tape. Another tape we use alot of is powder coat tape (a tan color) because it has excellent heat resistance and a good adhesive that does not leave residue.
Electronics Forum | Mon Jan 20 17:26:07 EST 2020 | sumote
I see what the issue is now. A previous owner has removed the slider from the machine. I can see where it was mounted (bare metal where it was originally mounted as opposed to the black paint/powder coat). Is this slider available to purchase to re
Electronics Forum | Fri Jan 13 06:54:12 EST 2006 | pjc
Here's a couple more: Vitek Coating Div., Vitek Research Corp. - Derby, CT - Contact Service Company Company Profile: Parylene Conformal Coating Services With Plasma Surface Treatment To Enhance Adhesion. Electrostatic Powder & Liquid Coating Of Med
