Electronics Forum | Mon Nov 27 22:01:25 EST 2017 | bibi11952
Hello SMTNet, We had received boards from our CM, some came with a Tin plated finish on the SMT hermaphroditic edge connector, while others came with Gold plated on the same connector. Tyco supplies both version and they apparently mixed up parts.
Electronics Forum | Tue Oct 30 14:39:41 EST 2001 | markhoch
Has anybody else out there had problems with SMT connectors with plastic locating pins lifting up during the reflow process? We've had several instances with several differant types of SMT connectors lifting up during the reflow process. We've even g
Electronics Forum | Fri Oct 22 19:34:56 EDT 2010 | hegemon
Thanks for the help guys. Nice to think I was basically on the right path. PCB manufacturer has finally conceded the barrel defects and is remaking the PCBs. We are big on pre-tinning the leads of TH connectors as well as providing some good pre
Electronics Forum | Wed Jun 27 13:55:10 EDT 2001 | peterson
We are having some difficulty achieving 75% fill on some through-hole power connectors. The board is very thick. Any suggestions? Our plan is to preheat extensively, pre-tin the leads and perhaps add paste in hole. Anything else that might achieve th
Electronics Forum | Wed Aug 24 03:17:21 EDT 2011 | richieoreilly
Hi, Thanks for the info. The current process is a standard SMT hand soldering process. The time does not include cleaning, prepping and pre-tinning. Its just the time for the re-flow of one joint itself. We are waiting on some new tips to experimen
Electronics Forum | Thu Mar 22 11:19:50 EDT 2007 | Stefan
Does anyone know how to use the Pattern matching option for fiducials at Philips Topaz or Emerald SMT machines? Is it worth using it? Can it be used for example when you deal with hard to recognize fiducials like those on pre tinned PCB's?
Electronics Forum | Fri May 03 16:06:44 EDT 2013 | hegemon
To be short, no change in profile is going to get you through this. As I recall the point of hard gold is to retard the wetting process, so no surprise here. For example a connector might have hard gold plating at the mating surface, but not at t
Electronics Forum | Thu May 08 19:52:40 EDT 2014 | hegemon
There are many different style LGA packages, but don't sweat it. Stick with the manufacturers recommendations for PWB pad geometry for a start. Voiding can be reduced by careful profiling, and also by pre-tinning the devices. QFN style packages can b
Electronics Forum | Tue Sep 22 08:35:47 EDT 2009 | cman
Did you try pre-tinning your board on this suspect pad/s to see if it improved wetting/solderability prior to printing/SMT placement and reflow? Does the pad/s not soldering tie to a ground layer? I would connect a T/C to each pad of the same part an
Electronics Forum | Fri Dec 16 03:47:46 EST 2005 | gpaelmo
Anyone have problems wave soldering white tin finish? We are an ems and our customer provides us the pcb's. SMT and TH components on the board. SMT is fine but when we wave solder, wetting to top side is very poor (solder only flows half way up). We
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
.gif)
winsouce.jpg)
