Electronics Forum | Fri Mar 31 15:56:13 EST 2000 | Neil Harris
I have a pre-bake / curing oven and I am trying to find the manufacturer for help, but I cannot find them. The oven says GCA CORP, Precision Scientific Group. Does any one know how I can reach them ??? Thank you, Neil
Electronics Forum | Mon May 20 16:56:24 EDT 2002 | Gary
Excess slump of paste and mis-registration can cause solder balls along with moisture. Use same date code of pcb and run with no components, paste only. Also pre-bake boards with humidity sensor in oven. If high humidity, moisture and solvent residue
Electronics Forum | Mon Jul 10 08:17:06 EDT 2017 | philc
Just a random thought, but we had an issue with having to replace faulty LED's on a PCB, and the solution turned out to be pre-baking the LED's prior to build. Just put them in an oven at 40C for 24 hours, then build. Result was zero defective LED's.
Electronics Forum | Wed Dec 22 18:09:07 EST 2004 | kmorris
At a previous job I had been taught that when reflow soldering polyimide flex circuits, it was necessary to pre-bake them before reflow soldering to prevent delamination. Our procedures said that there must be a 1hr bake prior to reflow, and the flex
Electronics Forum | Fri May 02 12:41:16 EDT 2003 | Chris Lampron
Hi Chris, I had worked for a flex circuit house for 10 years. You should be able to follow your solder paste guidelines for times and temps. You may want to consider pre-baking the flex if it is made with Kapton. Kapton is Hygroscopic and will delam
Electronics Forum | Thu Jun 08 23:26:28 EDT 2006 | Shawn Vike
We are a small company, reletivly new to doing our own SMT (1 year) and we are having an issue, I think. We manufacture many board with no problems, but we have one that constently defeats us. This particular PCB has ENIG finish, and we have had th
Electronics Forum | Tue Nov 01 15:26:43 EST 2005 | GS
Is it this your first experience of C-CGA RWK ? In order to approach a RWK of this kind of pakage it requires a capable process and clear operating procedure. In the past, the company who I use to work for, we rwkd plenty of this kind of CCGA. Earl
Electronics Forum | Thu Sep 30 12:29:01 EDT 1999 | Dave F
| Hi everyone, | | Greetings! | | I�ve got a 2-layered through-hole PCB�s having the following problems: | | Solder Mask peels after wave soldering at random locations and only at the bootom side of the PCB | Insufficient Solder and some solder ne
Electronics Forum | Thu Sep 30 21:37:44 EDT 1999 | Dreamsniper
| | Hi everyone, | | | | Greetings! | | | | I�ve got a 2-layered through-hole PCB�s having the following problems: | | | | Solder Mask peels after wave soldering at random locations and only at the bootom side of the PCB | | Insufficient Solder an
| 1 |
