Electronics Forum | Wed Apr 05 11:55:28 EDT 2006 | Cristina Oanca
I am working on a Substrate attach process. The package is gold plated, the preform is AuSn and the backing on the substrate is PdAg. I am using a Sikama reflow furnace. The profile has a 50 sec dwell time. I am over 280 degees C for a little over 1
Electronics Forum | Tue May 28 13:25:57 EDT 2002 | zanolli
Hello Anthony, The amount of solder that the process is capable of applying is the biggest limitation. I believe that solder paste is only approx. 50% metal by volume. When connectors are soldered in intrusive reflow, often the stencil is "overprint
Electronics Forum | Wed Apr 16 11:29:31 EDT 2008 | mmjm_1099
Per Tony SMT Here are more photos: Q15, Q16, Q17 represent good transistors on a 1 up board with the transistor locations that are in question. Q13 is a good transistor on a bad 2up board. Right next to it is Q14 a bad transistor on a bad 2 up boa
Electronics Forum | Fri Mar 06 10:43:32 EST 1998 | Alan Pestell
We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. 1) Do you need to
Electronics Forum | Tue Jan 14 10:41:49 EST 2020 | robl
Hi Arnel, I've used these before but with a 0.005" stencil. The key issue here was that the pins are actually a solder preform at the base that melts into the board - sort of BGA like, so too much paste can cause issues. Samtec have some great app
Electronics Forum | Fri Mar 06 23:09:11 EST 1998 | Scott Cook
| We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. | 1) Do you need
Electronics Forum | Fri Mar 06 23:13:13 EST 1998 | Scott Cook
| We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. | 1) Do you need
Electronics Forum | Wed Apr 21 18:24:13 EDT 2004 | pjohnson@volterra.com
Simple process - we use similar Kester solder brands of "no clean" low residue solder wick to clean our pads, then brush with isopropyl, and apply Kesters brand of tacky flux under a Leica 6x microscope. We do this on 7x7mm and 9x9mm packages. This w
Electronics Forum | Fri Mar 06 15:04:11 EST 1998 | Todd N
| We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. | 1) Do you need
Electronics Forum | Fri Mar 06 23:02:43 EST 1998 | Scott McKee
| | We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. | | 1) Do you
