Electronics Forum | Mon Aug 23 16:28:14 EDT 2021 | rodrigo
Hi all, One of our Fuji IP3 (we have two) keeps losing the proper data (proper, status, programs) when off for a couple of days or so. I changed the battery on the MP board (its voltage looked fine: 3.6v) but that didn't fixed it. I notice a super ca
Electronics Forum | Tue Aug 24 19:32:16 EDT 2021 | jdengler
I would start there. Swap MP boards between the 2 machines to see if the problem follows. If that doesn't change anything then try the SCSI board, you can continue until the problem moves to id the bad board.
Electronics Forum | Wed Aug 25 21:41:12 EDT 2021 | same problem
I'm having same problem with one of my CP-642s. We checked cards and now the monitors are not turning on.
Electronics Forum | Wed Aug 05 11:04:33 EDT 2020 | ehess
What is the proper way to discard scrapped pcb's, pcba's and potted pcba's?
Electronics Forum | Wed Aug 05 14:22:10 EDT 2020 | ehess
THANK YOU. ANY INPUT ON POTTED PCBA'S
Electronics Forum | Wed Aug 05 14:18:47 EDT 2020 | dwl
Anything with metal in it can be recycled; PCBs, wire, lead trimmings, used solder paste, etc. There are companies that specialize in this sort of waste. Typically they will provide you with containers and once you have enough waste, they will come p
Electronics Forum | Mon May 04 22:42:46 EDT 1998 | Phillipf Hunter
Okay, Fuji MTU4 experts...I need a precise way to determin the X-origin and Y-origin of the tray plates. The center of the S-nozzle referenced to the plate corner is very difficult to EXACTLY measure. I need accuracy to pick small QFP28's - otherwi
Electronics Forum | Wed Aug 05 14:53:08 EDT 2020 | dwl
I don't know about potted PCBs, you'd have to talk to the recycle. My guess is it doesn't matter, worse case they just pay you a little less per weight so you'd just keep the potted PCBs separate from the rest of the waste.
Electronics Forum | Thu Aug 06 11:11:44 EDT 2020 | stephendo
I think jurisdiction will make a big difference with respect to exact details. I would think for example that WEEEEEEEE in Europe would have a lot to say on the subject. And there would be several local governments with their own special regulations.
Electronics Forum | Wed May 06 15:25:07 EDT 1998 | Timm Rose
FUJI has a calibration tool for measuring the tray pick possition for the IP-3 machine. The part number is QPJ-1061
winsouce.jpg)
